Jump to content
SAU Community

Recommended Posts

Need parts numebr for

R34 Bayside Blue Eyelids

Cheers

Part No# F2410-AA010. but i would expect them to be quite dificult to get a hold of now. better off tring to get a colour like white (QM1 and just paint them in TV2)

i know this will be hard to find i would imagine but im after the part no. for a brake master cylinder from a wgnc34 autech 260rs stagea series 1 if possible (i think s1, and s2 is the same)?

i have 34 brembos on the stagea and need a brake booster to suit but i found out 33gtr and 34gtr use different masters i cant see why if they are the same brakes? hopefully the autech one will be the correct one.

thanks

would like a vin to confirm but fairly sure the part No# is 46010-0V600.

Your car is a 4WD with a RB26DETT correct? hence making it a AWC34

  • 2 weeks later...

Hey All.

Does anyone know the part number for the FRONT and REAR tie rod ends for a R33 GTS-T 1995 S1. Mine are shot and the guy at nissan ere has NFI. If i get the part number for him then maybe i will get more joy out of the nissan dealership. I am also considering aftermarket parts too. anyone suggest a good option?

Any help appreciated. :rofl:

what an awesome thread - well done guys!!!

i am after the part number for the inner door moulds which sits on the inside of the door trim & wipes the inside of the passenger/drivers window (for r32gtr)...i found this so want to know if this is correct:

R32INMOULDLHS-8083504U00

R32INMOULDRHS-8083404U00

Hi there,

I need the part numbers for the front plastic inner guards on a 96 R33 GTS-T. The ones that I need wrap around underneath the front bumper bar and intercooler. I need numbers for both sides please.

Thanks, Pete.

Part NO. 63842 15u000 RH

Part NO. 63843 15U000 LH

what an awesome thread - well done guys!!!

i am after the part number for the inner door moulds which sits on the inside of the door trim & wipes the inside of the passenger/drivers window (for r32gtr)...i found this so want to know if this is correct:

R32INMOULDLHS-8083504U00

R32INMOULDRHS-8083404U00

MARKO R1. SOUNDS GOOD TO ME I CAME UP WITH THE SAME NUMBERS

Hey All.

Does anyone know the part number for the FRONT and REAR tie rod ends for a R33 GTS-T 1995 S1. Mine are shot and the guy at nissan ere has NFI. If i get the part number for him then maybe i will get more joy out of the nissan dealership. I am also considering aftermarket parts too. anyone suggest a good option?

Any help appreciated. :thumbsup:

PART NO. 48520 15U26 LHF & RHF

PART NO. 55725 0C800 RHR & LHR

Hi,

I need the part number for the front centre mesh grill section between the headlights for a R34 GT-T, the NISMO version.

Thanks, Carey.

there are 6 different option need to know paint code. also year model an month to make sure

there are 6 different option need to know paint code. also year model an month to make sure

back again, unfortunately there is no paint code sticker on the car. so the only info i have is year model is 06/98 colour is white (r34 gt-t). hope that gives some clues .

Kind regards

Carey

Hi guys,

I search and look for the original partnr. of the shocks (front and rear) for a skyline r33 gtst from 1995.

Vin.nr. ECR33-055072

I hope that someone can help me with this. :nyaanyaa:

Regards Mindert

Edited by boro

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...