Jump to content
SAU Community

Recommended Posts

So I was pulled over at a vehicle checking station in Lonsdale, given a defect for 3 different items on my 32, 2 of which are absolute bullshit.

The first one was that I have a 'non-legit' momo steering wheel. This came about because my proper momo steering wheel is slightly worn, and the cop decided that a 'stamp' would be proof, but he didn't bother to check for it, and since it didn't look brand new, he decided it couldn't possibly be a 'legit' one.

The next is my favourite... I apparently have an atmospheric blow-off valve, even though everything between the filter to the exhuast is untouched. This cop, who was convinced I had an aftermarket BOV, kept pointing to the intercooler piping, calling it the manifold and telling me that the BOV would be around there... When I asked if he could find my non-existant atmospheric BOV, he came back with "I dont need to find it because I can hear it so I know its there". Great... people that know nothing about Skylines trying to tell me that they know more about my own car than I do.

The final one is actually legit, and that my car is 30mm too low all round thanks to my coil-overs. The trouble is, now I have to take it to Regency. Does anyone here have a spare set of stock suspension for an R32 GTS-t that I could borrow for a while in exchange for a carton of the owners favourite beer? Failing that, does anyone know where I could get the best price on a used set?

I haven't had a car taken to Regency before, so I'm guessing I'll have to return the car to pretty much stock. I wasn't defected for the exhaust, but should I find a factory exhaust anyway and fit it, just to be sure? I also have a boost gauge where the drivers side AC vent should be, will that be defectable as well?

Thanks in advance guys.

Link to comment
https://www.sau.com.au/forums/topic/173760-a-defect-and-a-call-for-help/
Share on other sites

I was seriously thinking of making a complaint against this guy, but theres probably no point anyway. The thing that really annoyed me the most was that when that guy went to write out the defect, I started talking to another cop, who actually knew about the factory BOV, yet I still get defected for it.

As for the camera phone, it didn't come to mind, but, judging by the cops attitude, he probably would have given me a fine for using a mobile phone in a moving vehicle, even though I was parked...

Dude don't tell me you stayed in your car??? First thing is to turn car off(ie no turbo timer) then get out of the car and be polite, if things turn pair shaped, get pen and paper out and ask for the oficers badge number and name, and take down police car details, and don't tell them you'll be speaking to thier boss, just let them wonder! I did this when my Corolla got done over and the cop rang back then next day to tell me i could got to the Sturt Cop Shop instead of Regency! I'm not saying it will work next time but it just makes them think about it!

Hmmm... Sound advice Deluxe, and believe me, its what I usually do, but I wasn't pulled over by a single car, I was at a defect checking station, and they specifically asked me to keep the engine running. I didn't have much of a choice, I could have lied about it being a turbo, but he probably would have asked me to rev it anyway, and would have heard the factory BOV then.

I could have tried to avoid it, but it would have looked fairly sus, and since there were no other cars there, i probably would have been followed and pulled over anyway.

I'm still a bit worried about this whole regency situation, how far do I need to go in bringing the car back to stock? I have a GTR wing, front bumper and side-skirts, will I need to change those to factory as well?

ETA:

Cubes, it was on Aldershot road, a little back street that gets me onto the expressway and avoids 2 sets of traffic lights. No idea why they were there, in the 15 minutes I was stopped, only about 8 other cars went past, half of them were far less road worthy than mine...

Edited by deel_249

as youve mentioned, youll definitely need to return it to stock ride height.

get rid of your boost gauge temporarilty, and make sure you hide any of the wiring that powers it.

As for your exhaust, they dont actually defect aftermarket systems (providing you have a cat convertor to comply with emissions); they actually defect the noise level: from memory, i think the max sound level youre aloud to have for a 6cylinder is 90DB. (mine measured 93, and they still fkn picked me for it... wankers.)

if you have a turbo timer, you will need to lose that as well.

They will also check/do: a brake test, check that child anchorage points are accessible through your parcel shelf for a baby seat, check your tyres arent too worn, test your seat belts, test your indicators lights and brake lights, test your horn, they will basically examine underneath your car for rust, seized up bushes etc, and of course > they will peer under your bonnet for stuff that isnt ment to be there like open to atmo BOVs. They cant say f**k all about the stock one. You should be able to pass with a pod filter, and a sturt brace as well.

No the "kit" should be fine, Just make sure your wheels are within size requirements, the exhaust is quiet or has been changed, and nothing obvious is showing or in the car! "normally" you will go thru and they will give you another checklist to check things off, so make sure you do do as many things as possible, so the second time you go thru it isn't sooooooo bad!

i dont think you'll need to worry about the cosmetics... but im not 100% on that!

i havent been to regency in 6 years! things may have changed.

Another thing you can always do, is ring up and enquire about the things youre worried about> dont tell them who you are of course, or what car you own> say youve got a 180 or something... hehe. > Especially for your MOMO steering wheel. I think if its over 330mm, its not defectible.

Aldershot road.. Bugger. :S

The R32's almost always get pinged for worn upper control arm bushes.

On the note of upper control arm bushes... Has any one been through regency with adjustable upper control arm bushes? No problems with the adjustable side of things?

Hmmm... worn upper control arm bushes, I'll remember that one, I'm booked in for a service at Boostworx on the 2nd, if I can find factory suspension before then, I'll get them to instal it, and maybe check out anything else that I could be defected for before taking it to Regency.

when i got defected the cop gave me a list longer than my arm. one was for the exhaust and even though i had a cat and it was an aftermarket trust system that was under the legal db reading with a certificate to prove it i was still sent to get a full emissions test done on my car by the EPA, cost me hundreds and i couldnt drive the car for 3 months until i had the test done hope the same thing doesnt happen to u.

emissions?

Vehicle standards told me we don't have emissions testing here in SA? Only a diesel emissions testing station?

Then on the other hand Vehicle standards said it is possible to get emissions testing done for petrol but it costs in the region of $4000.

What exhaust system do you have? I passed with a HKS Hi Power silent...and I put the stock air box on to lower the volume.

Check that you have a rear eye level brake light as well, since you've got a GTR rear wing.

And anothet thing the inspector told me to bring next time was a certificate of Exemption if you'r car was imported under the 15 yr old law or you don't have a Compliance plate.

BTW a cop was following me last night at around 1am and probably was going to pull me over. Luckily by the time he was in view I was home, so he just drove past slowly and just gave me the look :cheers:

Damn, I don't have an eye-level brake light. Guess I need to find something then. As for the exhuast, it should be fine, I've heard much louder that is apparently below the 90db limit.

You're lucky thanglongz, I was being followed by a cop once, turned into my driveway, and the cop followed me in! He honestly thought I stole the car. He even asked if I had a job! Nothing came of it though, guess I was lucky that time...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • hello! does anyone have a schematic that shows how to test the blower motor resistor for the vac system? i believe the part# is 27761-15U00. I think the resistor is toast, but would like to be able to test it somehow before i embark on the journey to find a new one. cheers! 27761-15U00
    • I don't know the answer to this, but did you have a look at the parts diagrams on amayama.com and see what they list around it for your car? As an example this should be it on my car. That's how I would check for required clips and things like that. But, I take no responsibility for you ending up with a box full of random OEM hoses, washers and clips after going down that path a few times. This definitely has never happened to me  
    • Most driving should* be done on one side of single lane divided roads. In the RHD world, you drive on the left side of the dividing line and the road is probably cambered equally on both sides. So your side of the road slopes away to the left. The same is true for the LHD world, just everything swapped to the other side and opposite slope. With a perfectly neutral, straight ahead wheel alignment designed to drive straight on a perfectly flat surface (or at least one that is level on the left-right axis, even if it has some slope in the fore-aft axis) you will not be able to drive on a cambered road without the car wanting to drift down the camber. You will need to add steering input in the opposite direction all the time. This is annoying. The solution has always been to set the camber and/or the caster to produce a continuous turning force in the opposite direction of the camber. The car will drive straight on the kind of camber for which it was set up, presumably as described in the top paragraph. But.... when the car is set up this way, as soon as you get into a lane, usually on a multi-lane surface road or highway, where the camber is not as presumed during setup, the car will usually pull to one side. In the RHD world, if you are in the fast lane on a big divided road, you are probably on the opposite camber compared to what the car was set up for (ie, sloping down to the right) and the combination of the setup and that camber will make the car want to go right pretty hard. Even a perfectly flat lane will tend to want to go right. There's no getting around it. Civil engineers who know their stuff (which is not an assumption that can always be made) will attempt to keep the variation in camber across a multi-lane road as small as possible, and if they can will attempt to make the fast lane as close to flat, or even cambered in the same direction as all the other lanes. This takes a lot of planning for drainage, control of levels, ability to deal with the elevation changes that occur at road junctions, etc etc. So it's not trivial to get it right. When they do make it work, then the annoyance is reduced, along with tyre wear, fuel consumption, etc. In theory, the civil engineers are supposed to worry about those aspects of road design also. * This used to be true, but now with very large highway systems, even just multi-lane surface roads running everywhere, it is less true now than it was, but the old assumption is the basis for describing the phenomenon, so let's just run with it for the moment.
    • I think the consensus was that's normal. Sloped road surfaces or something? I remember @silviaz went through this before. It might be one of those things you never notice until you pay attention to it.
    • Im not entirely sure exactly what or where its leaking from, he started to pull the boots to swap to my new tie rods + ends and it just vomited fluid, so he closed em up up, swapped the rod ends to the old rods and let me know so I can figure a solution out, im guessing its all origional as as I passed 103k miles earlier this year im sure its just in need of a full overhual/rebuild anyways.    If i could just yank it off and be good it wouldn't be an issue to ship it out and wait for the turnaround but the guy I work with doesnt really have space to keep my car for a week or two at a time, would rather drop it off and have a replacement ready to drop in
×
×
  • Create New...