Jump to content
SAU Community

Recommended Posts

hi, i tried searching but didnt get exaclty what i wanted.

Anways, i need to take my r33 to a suspension workshop to have it looked at. My suspension is so damn stiff and squeeky and is such a bad ride. Ive got ohlins shocks at the back and i think standards at the front. I think all springs are standard, though im not too sure. Does anybody kno any good places in sydney, preferrably western sydney where i can get the suspension looked at. I want them to look at all my bushes; castor, camber, toe, springs, shocks for leaks. you get the point.

ive heard mixed opinions with pedders but has anyone got good experience with any in sydney without me getting ripped off. such as blaktown or penrith I just want an inspection first, then i can go from there. Maybe there $14 check may be the way to go, but im just worried they might list items that are not necessary. Sydney kid has recommned heasmans , excellor, st.george, east coast and adrian moore suspesnions. Has anybody had expereinces with them?

Any help would be appreciated!

Cheers

Anton

Link to comment
https://www.sau.com.au/forums/topic/173840-suspension-workshops/
Share on other sites

hi, i tried searching but didnt get exaclty what i wanted.

Anways, i need to take my r33 to a suspension workshop to have it looked at. My suspension is so damn stiff and squeeky and is such a bad ride. Ive got ohlins shocks at the back and i think standards at the front. I think all springs are standard, though im not too sure. Does anybody kno any good places in sydney, preferrably western sydney where i can get the suspension looked at. I want them to look at all my bushes; castor, camber, toe, springs, shocks for leaks. you get the point.

ive heard mixed opinions with pedders but has anyone got good experience with any in sydney without me getting ripped off. such as blaktown or penrith I just want an inspection first, then i can go from there. Maybe there $14 check may be the way to go, but im just worried they might list items that are not necessary. Sydney kid has recommned heasmans , excellor, st.george, east coast and adrian moore suspesnions. Has anybody had expereinces with them?

Any help would be appreciated!

Cheers

Anton

Heasmans are good if you tell them exactly what you want :bunny:

Well I don't see any problem starting with pedders, their checks are cheap and pretty thorough. Just if you decide to go with them to fix things have a real good look over the list first and consider other sources, eg bushes etc.

The fact is that most suspension partts are pretty worn after 100,000klm so a lot might need replacing - its a good idea to have it checked out so you know.

BTW if it feels really stiff it won't be stock suspension. The ohlins are probably pretty good shocks (at least when they were new) and it would be strange to put them in with standard springs and standard rear end. Maybe measure up your front and rear spring sizes and post in Gary's thread to find out what rate they are?

Worn bushes, old shocks and worn rod ends will cause a loose feeling, unpredictability and clunks but not a firmer ride.

ok had a better look with jack today, it appears ive got coilovers all round..back ones look fine, front are leaking bad..oil is also heavily noticable on the bushes...ill fix that up but im thinking, its worthless getting the shocks repaired but i dont have much money to waste atm..im not going to be using this car for track, so do you think i can jus source some standard strut tops and put springs on for the front..

Edited by moonus

muahahha I hope you don't mean me I am drunken not knowledgeable.

moonans take them to heasman's at rockdale they are the ohilns dealers, they can test them and tell you what is wrong, what they cost to fix and what they are worth

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...