Jump to content
SAU Community

Recommended Posts

vent for the pipe to plug in? What vent? What pipe? Have you seen your battery? Just get a normal one, or sealed one is even better.

The only pipes I see have copper wire down the centre and is wrapped in black or red plastic.

Battery usually cost from the $70 - $100 mark, depends on what brand you buy.

Edited by KeyMaker
i'm pretty sure you can use any battery, you just need the clear tube for venting

Mines a stocky and this is how I got it - see pic

Cheers. I went and got a standard battery which apprently fits for a 33. cost me $88, brand name is something like GS Yuasa....

i have been defected for not using a compatable battery that used the std clear tube for venting any fumes outside of the cabin .. plus std car batteries arent really all that well sealed and leak .. rusting the holder, the metal above the tank and putting gasses into your cabin ...

sealed or find a way to box the battery

Sealed is the way to go, either a Pulse or an Odyssey are OK. Nothing worse than acid fumes in the boot.

Sort of a bit worried about hydrogen build up as well=====and the fule tank is nearby, make a good combo!!!

Seriously, if you use some cheap piece of shit, it'll rust out the whole place, have acid spray everywhere, and make the car look and be a piece of crap. I've seen other cars where they had skimped on the battery - plain ugly.

The group buy section has sealed batteries for 140. I bought one 2 years ago, and its still going strong.

If you can't find a listing for imported vehicle batteries, look into BMW batteries that may fit, they are in the boot as standard and have the vent tube. BMW usually have rather large batteries, unsure how much space in the R33 so double check dimensions first. If you can get one to fit, it will then be fully safe and legal.

Seriously, if you use some cheap piece of shit, it'll rust out the whole place, have acid spray everywhere, and make the car look and be a piece of crap. I've seen other cars where they had skimped on the battery - plain ugly.

The group buy section has sealed batteries for 140. I bought one 2 years ago, and its still going strong.

Make that 3 years ago Chris ...

You should use a sealed battery ( gelcell) or a vented battery and use the factory hose to vent it under the car .

To do anything else is illegal but more than anything else DANGEROUS because you have the fumes in the boot of the car and any spark could ignite them ..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...