Jump to content
SAU Community

Recommended Posts

id like both brake and clutch lines, if you cant get brake im in for the clutch

pm me the details if your taking payments

thanks

edit: its for an r33 gtst if that makes any difference

Edited by tek_01
  • Replies 97
  • Created
  • Last Reply

Top Posters In This Topic

id like both brake and clutch lines, if you cant get brake im in for the clutch

pm me the details if your taking payments

thanks

edit: its for an r33 gtst if that makes any difference

all together now!

want brake lines more but will go both if you can organise it :blink:

Yes ready to fit. Heat sleeve is to protect it. Not sure if it's needed but it sure wont hurt. UK, hmm I will look into that. Yes it's turning into both clutch and brake. I've been so bloody busy lately sorry everyone.

I'm in for both brake and clutch lines for R32 GTR - Let me know the final price when you know.

Cheers

Michele

Edited by LadyBytes

Ok got the brake lines details:

Goodridge lines ADR approved, anti wip and no rubber like other brands on joins which perrish with heat. Bolts straight on, made in England and quality product. Exact same as V8 Supercars use.

5 or more sets $195 each set of 4 instead of $260 Freight and handling anywhere in Australia $15

I'll now update the first post and get this thing happening.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...