Jump to content
SAU Community

Recommended Posts

  • Replies 97
  • Created
  • Last Reply

Top Posters In This Topic

are they all with the red heat wrap on them? could possible get black?

dont really like things to stand out on my car, less hassle if theyre semi-hidden

They all have the orange/red one. I'm the same as you. No colour in my engine bay. I'm thinking about just taking it off as it's on the inlet side of the engine bay anyway and not really that close to the block either.

I would suppose a quick coat of some black heatproof paint might work too if you're desperate.

??

Clutch line. R & R and bleed – 1H = $98, + $5 fluid

Brake lines. R & R and bleed system – 2-2.5H = $196 - $245 + $19.95 fluid for 1ltr Dot 4, $59.95 for 1 ltr RBF600

The brake lines.

6gxtidd.jpg

WOAH!! thats alot in labour.

I'm sure there will be some DIY or members who might be able to help out.

Put me down for a set of clutch and brake lines please

It's for a Skyline R34 GTT

My clutch system has had a conversion from push to pull type.

Does this make a difference to what clutch line i get?

Clutch lines should be posted out today guys.

Those who ordered brake lines as well, they should be in and posted about the middle of next week.

Shweet.... Clutch in time for DECA ...

Brakes in time for Texicana :ermm:

Sorry I get cranky when people don't read whats been written already. The clutch lines were posted late last week. They will arrive soon. The brake lines will be posted this week sometime if things go according to plan. If people want to know how much things cost, read the 1'st post. It's not that hard is it guys?

I get cranky when people don't read whats been written already.

Settle Petal - Abo said they "should" be posted, no need to get cranky if someone confirms... we're about helping each other here :D

Now take a chill pill and be nice :bunny:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...