Jump to content
SAU Community

Recommended Posts

Where: Victoria Lake Holiday Park, 536 Wyndham Street, Shepparton, next to the Shell servo on the lake.

Phone: 1800-880-070 (Toll Free) OR 03-5821-5431

When: Fri 24 & Sat 25 August

Luxury Lake Cabin - 4 booked / 0 reserved - Bec (4), NSW (1,2 & 3)

1 queen & 4 singles

for two people = $115/night, plus $10/extra person/night

Deluxe Cabins

1 queen, 1 double & 1 single - 7 booked / 0 reserved - Daz (5), Sarah (6), Al (7&8), Adz (9), Wayne (12), Michael Pope (13)

for two people = $95/night, plus $10/extra person/night

OR

1 double & 2 singles - 2 booked / 0 reserved - Saff (14), Big Bird (15)

for two people = $95/night, plus $10/extra person/night

OR

1 double & 1 sofa couch - 2 booked / 0 reserved - Juz (16), ziad (17)

for two people = $95/night, plus $10/extra person/night

Ensuite Cabins - 2 available as at 15/08/07

1 double & 3 singles - John Andrews (5), Mitchell - NSW (6), Evan (4), Steve (3)

for two people = $80, plus $10/extra person/night

Camping - call for details.

RE Reservations - these cabins are resevered for SAU until Friday 10 August ONLY.

As from Saturday 11 August they will be released to the public again. My advice - get in early or risk missing out. This weekend looks like it will be huge.

Cabins are self contained and have:

Shower/Toilet, TV/VCR, Aircon/Heating, Fridge, Oven/Hotplates, Microwave, Toaster, Kettle etc...

BYO Linen - sheets/doona/pillow/towels

NOTE - You need to say you are with Skylines Australia to get one of the above cabins and also to receive the 10% discount I have arranged for us.

IMPORTANT NOTE

While driving in the Caravan Park - ALL cars must not exceed WALKING PACE (thats approx 3km/hr). All drivers MUST abide by this rule or you risk being asked to leave the Caravan Park immediately by management. (This is something that is out of my control. If you break the rules, you're on your own.)

One last thing - I ask that when you call and book a cabin can you PLEASE let me know by posting or by PM the number of the cabin you have booked. Just lets me keep track of what we still have available, or if I have to start looking at other accommodation options for people.

Thanks guys/girls - see you up there.

PS. Dinner has been booked at Taco Bills for Sat 25 August at 7.00pm (put your party hats on).

Link to comment
https://www.sau.com.au/forums/topic/174975-accommodation-deca-august-2425/
Share on other sites

  • Replies 78
  • Created
  • Last Reply

Top Posters In This Topic

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...