Jump to content
SAU Community

Recommended Posts

I have for sale a set of Tomei Poncams for series 2 R33.

BRAND NEW IN BOX!

1X Intake

1X Exhaust

256 degree cam.

No valve springs needed.

They are for series 2 R33 built from Sep 97 part.

Part number is 143050.

Asking $700 delivered FIRM!

Or swap for series 1 Poncams part number 143020(must be new)

PM if interested

CHEERS

Link to comment
https://www.sau.com.au/forums/topic/175669-fs-tomei-poncams-rb25det-series-2/
Share on other sites

Sounds like they will fit my RB25 NEO! Would I be right?

I dont think they fit NEO engines.Tomei have a different part number on their website.But the best way to find out would be to take your car to your tuner and get them to tell you what part number and cams would suit your car. :D

Does anyone know what effect the CAMS have on fuel economy?

Speaking generally..

Mild Road Cam 257deg-260deg. Gives low end improvements and used in unmodified engines suitable for all car types and gives a smooth tickover. Fuel economy may actually improve and power and responsiveness will be greater.

Fast Road cam 270deg-285deg. Good compromise for a road car the tick over is still fairly smooth and emissions are within legal limits. A good choice for a car used daily and for weekend track use and perfect for a hot hatch. This profile still gives reasonable fuel economy and a choppy tickover.

Competition cams 290deg-320deg. The best performance profile for an engine which works continually over 3000 revs. The tickover is very lumpy and irregular and the car is lumpy to drive round town. Fuel economy is pathetic and it is unlikely that a car with this fitted will pass any kind of emissions test.

Edited by Shift_Lock

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...