Jump to content
SAU Community

Recommended Posts

hey guys

i have a huge problem and im looking for a soloution i have taken my car to a few mechanics who have done some tests and have all come up with diffrent soloutions.

I have an R33 Skyline GTST 1995 with an ARC intercooler 3inch exhaust, Apexi pod and blitz bov stock boost

About 9 months ago i had the car on the dyno and it had 175RWKW but the guy told me that it had exesive blow by and he thought its rings where shot. but said its not a big issue.

I started experiencing misfires on bost and surging also, I thought it was related to the coils or sparkies so i changed them and gapped the sparkies worked for a while then stopped and got worse, It now seems like it running on only 5 cylinders

so i took the car to the mechanic and he said it was rings and pistons as he did a comp test on the car and piston one came up at 50 psi however he didnt check the rest,

I then decided to take it to another mechanic as the car still feels pretty strong and engine sounds imaculate with the exception of a miss which i can hear mostly through exhaust (very lumpy) The second mechanic said it was just rings so i took it to a third and he said its just a blown head and . seems to think its the cause of excesive blow by.

When i took my coils and sparkies out to see if it was the issue i foud the sparkies where rusted which would probable point towards a blown head?? but no water in oil??

just wondering if anyone can shed some light onto this horror situation I dont mind spending money but i dont want throw money away. what do you guys think ???

any help will be appreciated

Edited by daleb4u
Link to comment
https://www.sau.com.au/forums/topic/175908-whats-wrong-with-my-car/
Share on other sites

u can have a cut in your head gasket from your cylinder to water jacket and miss your oil gallery's. remove your radiator cap and warm your engine up. if you are getting bubbles in the radiator or excessive water out your exhaust and having to fill radiator all the time it will be the head gone. i had one car that had so bad of a head gasket blown it actually got a hydraulic lock up in the engine and wouldn't turn over. also take the oil filler cap off when the engine running. if excessive air pressure coming out of here that can point to blow by. hope some of this info helps. by the info you have given , sounds like the engine has gone anyway

u can have a cut in your head gasket from your cylinder to water jacket and miss your oil gallery's. remove your radiator cap and warm your engine up. if you are getting bubbles in the radiator or excessive water out your exhaust and having to fill radiator all the time it will be the head gone. i had one car that had so bad of a head gasket blown it actually got a hydraulic lock up in the engine and wouldn't turn over. also take the oil filler cap off when the engine running. if excessive air pressure coming out of here that can point to blow by. hope some of this info helps. by the info you have given , sounds like the engine has gone anyway

i have never had to fill up water but when i open it up while its warm i get bubbles as for the oil cap, I get no smoke or air engine feels very healthy and cleam

Do a comp test on all cylinders when the engine is warm.

Also do a comp test on all cylinders when engine is cold [the colder the better], but before you do it, squirt some oil into the cylinder - preferably a heavy oil, gearbox even.

If you get a bad reading when its hot and really good reading when its cold then its rings. If it makes no difference and its low then its guides, valves lifters etc. It could be a bad lifter?

if you had excessive blow by your plugs(especially the one in the cylinder that dropped) it would have been covered in oil.

rust=water

water=head gasket or head

no oil on spark plugs just tips and half of thread rusted as thats why im leaning towars gasket , also the was going great and i take realy good care of it , i service it every 2000 without fail (i know its too much but id rather be safe)

would a blown head or gasket drop comp readings ??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Gday   on the hunt for an rb25 gearbox and clutch to go into my R32 rb25/30 build happy to travel a bit or pay for freight for the right one From my limited research, think I need an rb25 driveshaft yoke to make it fit so I’m after one of those too located Bathurst
    • Common for single gauges to be swapped around. My 33 GTST when I bought it had a GTR tacho fitted, everything else was GTST gauges.
    • Google says for a 1998 Nissan Maxima to pull/pry, and the metal pin might even come out with it. I'd do a bit more googling, there was a few videos, find some where the shafts/needles appear most similar and compare the techniques.
    • Details: Turbo Borg Warner EFR 9180 with 1.05 rear housing Upgraded TurboSmart integrated BOV Sanded and powdercoated compressor cover in gloss black Elbow welded with wiggins clamp Speed Sensor(Not included) (Can include oil drain(heat wrapped + titanium intake pipe with almost new filter for a tad extra). Manifold: 6 Boost RB26/30 twin scroll manifold  e-MAP ports drilled into both scrolls(I was using the TAARKS EMAP KIT) Turbo is in excellent condition. Always used Penrite 15w50 Racing oil(Changed less then 2000ks). Also using the Turbosmart OP regulator and filter. Downpipe: 4inch Stainless steel with VBand inlet and outlet clamps(included) Heat wrapped Dual ports for Dyno/Wideband usage Will throw in free 2.5 inch intercooler pipe(2.5inch From turbo outlet to 3.5 inch intercooler) - Powder coated black. Turbo made 563rwkw on mainline hub dyno at around 24-25psi boost - Pump fuel. Will def make over 600kw on e85. Didn't bother as my e-MAP was through the roof with my setup sitting past the choke line. I have a cnc ported and fully built head on my 3.2. Turbine speed saw max of around 109k rpm. I'm running this on my R32 GTR, with AC, and the original power steering pump. The manifold clears the AC lines, ABS, and everything else. Although I had new AC lines because I just wanted new ones and I heat wrapped them as well. This will make more power on a slightly lower capacity motor with a higher PR. And I have since upgraded to a G45-1500. Have pics and videos if need be.  Absolutely nothing wrong with setup. Turbo is in perfect condition. No shaft play or oil leaks at all. All the work was professionally done. The transient response of this is fkn amazing. I cannot rave more about this turbo. If I wasn't chasing 4 figures, I would have kept it. $5000 NZ. Located: Auckland, New Zealand.    
    • I particularly like the look of the John Player Special team. (Thumbnail isn't different but hit play for the clip)  
×
×
  • Create New...