Jump to content
SAU Community

Recommended Posts

hey guys

i have a huge problem and im looking for a soloution i have taken my car to a few mechanics who have done some tests and have all come up with diffrent soloutions.

I have an R33 Skyline GTST 1995 with an ARC intercooler 3inch exhaust, Apexi pod and blitz bov stock boost

About 9 months ago i had the car on the dyno and it had 175RWKW but the guy told me that it had exesive blow by and he thought its rings where shot. but said its not a big issue.

I started experiencing misfires on bost and surging also, I thought it was related to the coils or sparkies so i changed them and gapped the sparkies worked for a while then stopped and got worse, It now seems like it running on only 5 cylinders

so i took the car to the mechanic and he said it was rings and pistons as he did a comp test on the car and piston one came up at 50 psi however he didnt check the rest,

I then decided to take it to another mechanic as the car still feels pretty strong and engine sounds imaculate with the exception of a miss which i can hear mostly through exhaust (very lumpy) The second mechanic said it was just rings so i took it to a third and he said its just a blown head and . seems to think its the cause of excesive blow by.

When i took my coils and sparkies out to see if it was the issue i foud the sparkies where rusted which would probable point towards a blown head?? but no water in oil??

just wondering if anyone can shed some light onto this horror situation I dont mind spending money but i dont want throw money away. what do you guys think ???

any help will be appreciated

Edited by daleb4u
Link to comment
https://www.sau.com.au/forums/topic/175908-whats-wrong-with-my-car/
Share on other sites

u can have a cut in your head gasket from your cylinder to water jacket and miss your oil gallery's. remove your radiator cap and warm your engine up. if you are getting bubbles in the radiator or excessive water out your exhaust and having to fill radiator all the time it will be the head gone. i had one car that had so bad of a head gasket blown it actually got a hydraulic lock up in the engine and wouldn't turn over. also take the oil filler cap off when the engine running. if excessive air pressure coming out of here that can point to blow by. hope some of this info helps. by the info you have given , sounds like the engine has gone anyway

u can have a cut in your head gasket from your cylinder to water jacket and miss your oil gallery's. remove your radiator cap and warm your engine up. if you are getting bubbles in the radiator or excessive water out your exhaust and having to fill radiator all the time it will be the head gone. i had one car that had so bad of a head gasket blown it actually got a hydraulic lock up in the engine and wouldn't turn over. also take the oil filler cap off when the engine running. if excessive air pressure coming out of here that can point to blow by. hope some of this info helps. by the info you have given , sounds like the engine has gone anyway

i have never had to fill up water but when i open it up while its warm i get bubbles as for the oil cap, I get no smoke or air engine feels very healthy and cleam

Do a comp test on all cylinders when the engine is warm.

Also do a comp test on all cylinders when engine is cold [the colder the better], but before you do it, squirt some oil into the cylinder - preferably a heavy oil, gearbox even.

If you get a bad reading when its hot and really good reading when its cold then its rings. If it makes no difference and its low then its guides, valves lifters etc. It could be a bad lifter?

if you had excessive blow by your plugs(especially the one in the cylinder that dropped) it would have been covered in oil.

rust=water

water=head gasket or head

no oil on spark plugs just tips and half of thread rusted as thats why im leaning towars gasket , also the was going great and i take realy good care of it , i service it every 2000 without fail (i know its too much but id rather be safe)

would a blown head or gasket drop comp readings ??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...