Jump to content
SAU Community

Recommended Posts

[Mark here... This is seans car, he crashed it and done a bit too much structual damage so we are writing her off and selling bits.. its repairable. but requires chassis rail alignment and a bit of cash.. and would rather build a RB25Neo 180sx/s13... so will trade alot of parts and or cash for a working/regoed 180sx/S13 with a clean body. if you know of any there will be a small spotters fee aswell. :(. must be rust free clean, good interior. dont care about engine.. prefer CA18 and manual :rofl:

Sean has made this ad using my account and all enquires should be directed to him on 0417784987 NO SMS. -

you can also call me on 0400 793 618. NO SMS' thank you.

thanks

mark.]

R34 2dr GTT Tiptronic

Purchased as a Grade 4.5 car and is extremly clean.

colour is pewter

Motor has 55,000ks on it

has a full turboback exhaust Jasma/blitz cat back with unknown high flow cat. flyn front and dump

interior is mint no damage at all

tail lights are still good

all glass is good.

RHF guard is good but scratched on top. also have LHF headlight lense with scratches on it.

rear subframe (bent RHR LCA) $700 with diff.

Diff perfect condition recently serviced $350.

Coilovers are fully adjustalbe Ohlins (top model for the R34 when purchased) that retail close to $5000(including fitting weight corner balancing) new used for round 10,000km

also have some volk TE37s 18x8.5 n 18x9.5 wrapped in POTENZAz Re040 235/40/R18 and RE01 265/35/R18 on the rear one with minor damage and one needing repair ... tyres have 70%-80% all round fronts are 2 months old.

unfortunately front n rear bar, front right guard, boot are damaged, also had a front mount but only the core is left... (JJR Bar and plate type 2 very similar to the Trust kits)

just let me know what you want and asking price :rant:

can take pics of anything if needed

and welcome people to come round and have a look.

cheers

PS. please only post if you are interested in items thanks. :rofl:

post-25555-1184312835_thumb.jpg

post-25555-1184313083_thumb.jpg

post-25555-1184313262_thumb.jpg

post-25555-1184313758_thumb.jpg

post-25555-1185354854_thumb.jpg

post-25555-1185354919_thumb.jpg

Edited by markimak
Link to comment
https://www.sau.com.au/forums/topic/176434-wrecking-r34/
Share on other sites

  • Replies 63
  • Created
  • Last Reply

Top Posters In This Topic

holy batman..what happened??!!

Might be interested in the lower dash console piece depending on how much u want for it. Mine's got a broken clip on the right hand side and never sits flush.

See pic circled in red.

post-6973-1184315744_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/176434-wrecking-r34/#findComment-3228074
Share on other sites

thanks mark

for the one interested on the intercooler i jst took a pic as it was straight off the car, sorry if its DIRTY !! no real big scratches on it does hav a lil coolant stain or sumthin on the left that ill kinda wipe off n take another pic if u think its hidin damage

post-25555-1184671492_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/176434-wrecking-r34/#findComment-3234746
Share on other sites

im interested in the turbo back exhaust.. is it in good condiotinon and info on it?

If it has the factory pop up GPS.. where did they put the 3 gauges??

Edited by Silver_R34_GT-T
Link to comment
https://www.sau.com.au/forums/topic/176434-wrecking-r34/#findComment-3235027
Share on other sites

im interested in the turbo back exhaust.. is it in good condiotinon and info on it?

If it has the factory pop up GPS.. where did they put the 3 gauges??

I'll try to be of some assistance, hope u dont mind marki....

The catback is Jasma and sounds really sexy, probably the best RB25 rumble I've ever heard. The dump/front section is from FLYN performance and set Sean back $280 not even 3 months ago. I'm pretty sure the cannon is the only part with a few dings on it, have to wait for Mark or Sean to reply for confirmation there. It's a quality system and you wont regret coming down to have a look I'm sure.

The 3 gauges were an optional extra that the original purchaser obviously didn't bother with, not all GT-T's have them.

Link to comment
https://www.sau.com.au/forums/topic/176434-wrecking-r34/#findComment-3235766
Share on other sites

exhaust as said above is a jasma catback, only one dent underneath the cannon pretty sure it will hav no effect on flow or make any leaks, front is from FLYN and did set me bak $280 i think only a month or so ago.

as stated R34s hav options such as 3 gauges, GPS/Nav/TV or nothing... this GTT got the luxury GPS one so ther is no gauges other than the ones on dash (oil pressure, fuel and water temp)

Link to comment
https://www.sau.com.au/forums/topic/176434-wrecking-r34/#findComment-3236005
Share on other sites




  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...