Jump to content
SAU Community

Recommended Posts

I bought my car from a dealer + when he explained the security in the car he said he'd left the stock immobiliser in + added the proximity sensor immobiliser as well, giving me 2 different immobiliser setups...

If I don't hit the 'unlock' button on my key remote, the car won't start. It'll keep turning over, but refuses to start. It self arms this as well. If I turn my engine off + don't lock the car, I still need to hit the unlock button to disable the security + start my car.

And of course if the proximity sensor isn't next to the ignition, the car won't start.

Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/page/2/#findComment-3611471
Share on other sites

So the factory alarm is supposed to be stripped as part of compliance? If so, what is the little fob thing on the key chain for, and also the sensor looking things on the dash? Do they do anything?

who did the compliance on it? if ISASO then it was me that removed it. I've had 3 of them disable 3 cars on me so when I do the compliance immobiliser them they come out. its not factory anyway. they are dealer fitted and some of them are barely fitted. most are in with scotch locks and they are ALWAYS loose.

the black tag on your keyring(autowatch badged) is the Immobilser. two pt std issue. the round thing below the boot release switch that looks like something pushes into it does nothing.

Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/page/2/#findComment-3612926
Share on other sites

hey guys,

just a quick note about the adr82/00.. if the vehicle is fitted with a factory immobiliser there is a way around having to replace it

dotars recognise the ULC-S338/98 which is the canadian standard for immobilisers (all vehicles in canada must be fitted with an immobiliser whether stock or aftermarket)..

The ULC-S338/98 does mention the Infiniti v35 so all you need to do is prove to dotars that the v35 and g35 have the same immobiliser (which you can grab of the Nissan Fast system)

We have been using this evidence for most vics and dotars have never questioned it...

hope this helps

cheers,

k

Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/page/2/#findComment-3613715
Share on other sites

I'll apologise in advance for my lack of knowledge both in this area, and cars in general. So I have the keychain thing, the two sensors on the dash, a small light just under the clock that flashes once the keys out of the ignition, and a red light labelled "Security" to the right of the steering wheel. Do I have an immobilisor or an alarm, and if so, how can they be activated?

Also, I got the car from a dealer in Sydney who do their own compliance.

Sorry again, this isn't really my thing! If I was in Brisbane, I'd be over seeing Chris Rogers already!

Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/page/2/#findComment-3615516
Share on other sites

word of advice- leave it all alone. if you activate it by mistake (IF it works- see other post ) then you have stranded yourself. if you have the nissan branded tag press it into the slot below the steering column. that will activate the dealer fitted alarm. the OE one 1s self triggered. the autowatch one is the same.

Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/page/2/#findComment-3615654
Share on other sites

  • 4 years later...

any of the alberts stores. see cannington and speak to pete. get them to toss a autowatch 446 P in it.

Hi Chris,anyone you could recommend in Melbourne?

Edited by rawzz_v35
Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/page/2/#findComment-6401388
Share on other sites

ok so stopped down at Alberts today. They are going to put in a slightly different system that runs off my car key. $550 installed.

Sound about right? I asked for the Autowatch 446 Premium, but Pete was talking something slightly different.

Once its booked in, I'll let you know exactly what it is :)

Thanks again!

Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/page/2/#findComment-6405179
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, this is probably where a wiring diagram and a multimeter come into play.
    • I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia front end... *Edit: On closer inspection the test car still had the R32 body, but only the front end had Silvia panels etc.
×
×
  • Create New...