Jump to content
SAU Community

Recommended Posts

i was "Driving Swiftly" down a lane cause we were in a hurry. and i saw something that scared me, i hit the brakes but it was too late. a huge drop infront of my sent the skyline on an angle and the awful sound of a grinding front spoiler made my teeth shatter.

i have owned the car for 2 weeks and have now scraped it. there is no real damage, just some scratches on the underside. but it made me think and i put the question to people who have to deal with the same kind of problem.

how do you deal with such a low bumper, and how durable are they :S

can they take the occasional knock?

Edited by finster
Link to comment
https://www.sau.com.au/forums/topic/176767-front-spoilers/
Share on other sites

it also depends on how many times it has already been repaired too. body filler will just chip away even with the slightest touch. you can also buy the flexable bumpers, i seen them in a magazine, mind you they would be pricey. bumpers have a limited flexability as paint has near none. in many cases the bumper will flex and the paint in that area will tend to come away over time...

Link to comment
https://www.sau.com.au/forums/topic/176767-front-spoilers/#findComment-3231804
Share on other sites

i was "Driving Swiftly" down a lane cause we were in a hurry. and i saw something that scared me, i hit the brakes but it was too late. a huge drop infront of my sent the skyline on an angle and the awful sound of a grinding front spoiler made my teeth shatter.

i have owned the car for 2 weeks and have now scraped it. there is no real damage, just some scratches on the underside. but it made me think and i put the question to people who have to deal with the same kind of problem.

how do you deal with such a low bumper, and how durable are they :S

can they take the occasional knock?

Mines scratched slighjtly underneath, Skylines seem to have a bad turning circles (like many other Jap cars) as opposed to bigger commodores.

The best advice i can give you is "take your time when turning, doing u turns, going over bumps etc...

Link to comment
https://www.sau.com.au/forums/topic/176767-front-spoilers/#findComment-3232081
Share on other sites

dont worry mang.. its learnt reflex and instinct lol

before you know it you'll be dodging potholes without even thinking...

and esp on your usual routes u'll know where they are.. i always stay out of the lane if i know tehres a bump coming up

+1

Link to comment
https://www.sau.com.au/forums/topic/176767-front-spoilers/#findComment-3233414
Share on other sites

as far as bumper flexability goes you can get a flexible primer (undercoat) to help prevent fractures in the paint...

Thats what I did although its better for stone chips than anything else...... I am having the car completely resprayed and at the same time they are making me a mould of my front bar and making an extra two (current one has been repaired too many times previously - previous owner + 1 is mine). This way both the other bars will be ready and waiting - they are also giving me the mould to keep so I don't see every other 33 in the area with the same bar :domokun:

The cost of the two new bars + the mould is $650. Pretty cheap considering the cost of replacing/repairing and I can use it on any future skylines or sell the mould to a friend with the same bar ;)

Link to comment
https://www.sau.com.au/forums/topic/176767-front-spoilers/#findComment-3233507
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...