Jump to content
SAU Community

Recommended Posts

ok i need a new turbo was gona get a hks3037 internal gate with all fittings dump lines nismo injectors pump turbo is us$2900 pump$200 injectors $890.

then thought get a sliding high flow plus pump and injectors then spend the rest on kit rims and pumped front and rear guaurds and paint.

my 33 is pritty rough now eg... took wing off now holes,ding in drivers rear quarter.

so what do you think.power or a bit less power but car looks good.

so what should i do?

Link to comment
https://www.sau.com.au/forums/topic/176795-what-should-i-do/
Share on other sites

im usually all about power then show. but if the state that its in bothers you everytime you look at it then id fix the paint n shit first...then youll feel better about throwing a dick load of money at a nice car rather than spendning a dick load of money on a car that still needs cosmetic attention. get it lookin shmick first then you can 'sort of' justify spending money on it to make it faster.

^^ theres logic to that thinking

i got a ding in my car but i still get out and wash it every week because if i dont it would be easy to slip in your thinking that its a piece of crap now and the car just gets even worse

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...