Jump to content
SAU Community

Recommended Posts

  • Replies 69
  • Created
  • Last Reply

Top Posters In This Topic

Yeah sounds about right. They guy drove off nicely, like it's not as if he was driving it like he stole it but if you like I can find out the street address etc of where it was and PM it to you and you can go from there. I saw it in Belair (near Blackwood)

hey i drive mine like that all the time don't assume cause someone drives hard it might be stolen

A simple yet highly effective way to slow potential thieves down is to modify the ECU bracket (holds ECU in behind kick-panel) so that the ECU can be removed and refitted as required.

With this kind of set-up in place it's a 1 minute job to R&R the ECU. Kind of hard to start the car without the ECU fitted. Of course, thieves can simple bring their own ECU along, but hey, at least it adds to the time they need to successfully steal your pride and joy.

Black32; i wasnt suggesting that people post up "instructions" on how to flog our cars -

look at it as a request re peoples experiences with theft, and ways to deter the theiving little c**ts. theres nothing wrong with little tips and tricks to make life harder for the average bandit.

some good ideas mentioned guys! :ninja:

Edited by MSPEC33

As a person with full comp insurance and paying 1,700 a year for it, I would still like to know how they steal our cars and how we can make life harder for them, putting up information on this will also make sure skyline owners do things to prevent it from happening.

Do you think everyone feels happy when their car is stolen compared to when they find scratch marks on their door because the theif couldnt break in?

Prevention is better than cure.

I tell ya what, I've always said this, BUT if my car was to get stolen, I would much prefer to see it burnt to the ground, as your car is NEVER the same when and if returned, Is too much of a headache to fix it back to what it would have been, It's more anoying to have your car broken into for a couple of CDs and smokes, cos it's not worth claiming anything and is generally cheaper to fix the smashed window than pay excess!

If u cant afford full comp insurance, then dont drive a nice car, or hit mine for that matter.
Damn straight.....

x3 thats the first thing people should allow for when purchasing a vehicle of any kind

I tell ya what, I've always said this, BUT if my car was to get stolen, I would much prefer to see it burnt to the ground, as your car is NEVER the same when and if returned, Is too much of a headache to fix it back to what it would have been, It's more anoying to have your car broken into for a couple of CDs and smokes, cos it's not worth claiming anything and is generally cheaper to fix the smashed window than pay excess!

couldnt agree more @ burnt to the ground, my first skyline i had was aussie R31 i bought it cheap from a guy cuase it had been stolen and the motor had been cooked he replaced the bottom end but he said it didnt drive the same when i got it and stopped the front end would bounce due to stuffed shock i replaced those and car was all good :D

had it been my car when it was stolen i would of gotton rid of it also

its the unfortunate truth guys,a nd you know it. not every person with whatever car has full comp insurance. especially a lot of the much younger drivers. i may be incorrect in some peoples eyes, but 1 in 3 turbo skylines that i see on the road today are driven by young drivers. The facts are young drivers = an expensive insurance bill when it comes to these cars...

hell - i suffered when i bought my car in 2001. around $3600 per year... i pay almost a quater of that now, so i'd be an imbesile not to have full comp.

If u cant afford full comp insurance, then dont drive a nice car, or hit mine for that matter.

Hmmm... yeah but Daz, the insurance payout is never going to cover the massive loss (time, effort and money) that I would suffer if I lost my pride and joy to thieves... and I've got agreed value of $38k ('94 GTS25t)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Has equal chance of cleaning an AFM and f**king an AFM. I think you can work out what happened. When the Hitachi ECU sees the AFM die and goes into the associated limp mode, then it will start and run just fine, because it ignores the AFM and just runs on idle maps that will do what it needs to get it going. But there is no proper load signal, so that's about all it can do. My suggestion? If you don't want to go full aftermaket ECU, then get some R35 GTR AFM cards and some housings to put them in, in the stock location, and Nistune the ECU. Better to do a good upgrade than just replace shitty 40 year old tech with the same 40 year old tech.
    • So my car was recently having trouble starting on initial crank, I would need to feather the gas for it to start up but besides that it would start and run fine. So I clicked the idle air control valve (with throttle body cleaner) and cleaned the MAF sensors (with MAF cleaner). The start up issue was fixed and now the car turns over without the assist of the throttle, but the car is in limp mode and wont rev past 2.5k RPM. From what I understand the IACV would not put the car in limp mode, so I am to believe it is the MAF sensors, but it was running fine before and now I cant get it out of limp mode. I cleaned the MAF made sure the o rings were seated properly. Made sure the cables were plugged in properly, the cables also both read the same voltage. Does anybody know why this is or what could be causing this or how to get it out of limp mode?
    • Ooo I might actually come and bring the kids, however will leave the shit box home and take the daily
    • Thanks. Yeah I realised that there's no way I'd be able to cover the holes with the filler, it would just fall through. Thanks again @GTSBoy!
    • That was the reason I asked. If you were going to be fully bodge spec, then that type of filler is the extreme bodge way to fill a large gap. But seeing as you're going to use glass sheet, I would only use that fibre reinforced filler if there are places that need a "bit more" after you've finished laying in the sheet. Which, ideally, you wouldn't. You might use a blob of it underneath the sheet, if you need to provide some support from under to keep the level of your sheet repair up as high as it needs to be, to minimise the amount of filler you need on top. Even though you're going bodge spec here, using glass instead of metal, the same rules apply wrt not having half inch deep filler on the top of the repair. Thick filler always ends up shitting the bed earlier than thin filler.
×
×
  • Create New...