Jump to content
SAU Community

Recommended Posts

Hey peoples,

Im new to these forums as im sure you can tell,

Im also looking at getting myself an R34 in the coming months

My dilemma is this:

I definatley want the R34 but im not sure whether its worth paying 18-21k for a GT or spending the extra and paying around 25k for the GT-t

I do want it turbo charged whether i buy it like that or have to do it down the track (preferrably already done hence the Gt-t)

Also looking for something as close to stock as possible but i mean if the price is right then some modifications wouldnt be so bad.

Also if anyone can point out some of the major differences (or even just minor ones) between the two models it would also be greatly appreciated.

Thanks,

Steve

Link to comment
https://www.sau.com.au/forums/topic/177016-r34-gt-vs-gt-t-need-some-advice/
Share on other sites

dunno much about differences but i'd say go for the GTT.

SHOULD have better brakes and suspension etc (please correct me if i'm wrong)

Also, make sure you get a workshop who are knowledgeable in skylines to do a thorough check of the vehicle prior to purchase.

Both will be money pits, the Gt-t will be slightly less in the long run as far as modifications go.

Most skylines come over from Japan with some bolt-on goodies, depending on what exactly has been fitted could also save you some time & money.

The R34 I bought already had a HKS pod Filter, HKS B.O.V (plumb-back), short shifter kit, turbo timer, some decent rays eng. mags, aero bodykit with nismo rear bar & a sunroof which was a bonus. I was able to negotiate it down to a lower price than other equivalent R34's with less or no mods at all, so it pays to haggle & shop around.

Good luck with your search & be sure to post a pic when you do :)

Sweet, well looks like the GT-t is the way to go, i was leaning that way anyway.

Yeh i enjoy driving heaps, not to mention i have a fair hike to work and back every day, or should i say night, (well is 3am still considered night if you started work in the evening?) but that leaves me with nice open roads all the way home, not that i speed or anything?!

I do want it Turbo'd eventually either way, strengthening the need for a GT-t straight up

As far as a sedan goes though, i'd prefer the coupe just because i find it more pleasing to look at lol, mainly the rear from the wheel arch back

And yeh fo sure, when i get it pics will be uploaded!!!

Turbo'ing a GT isn't as simple as just bolting on a turbo. Its actually easier to replace the entire n/a engine with a turbo one...and for that matter, its easier and cheaper to just get the GTT to start with. There's also a lot more to the GTT than just the turbo. I'm not sure of the specifics but at least the brakes will be bigger on the GTT, to counter the extra performance.

Whether you wanted a turbo or not, I'd still recommend the turbo car. The n/a would just feel a bit lacking in performance and at some point you'd find yourself either wishing you'd got the turbo or selling it and buying the GTT anyway. (I did exactly that type of thing with a nissan silvia s13. sold the n/a one and bought a turbo'd one that was almost exactly the same except for the colour).

So as far as advice goes, its very simple. Buy a Stagea :) nah just kidding, I'd say get the GTT - you wont regret it :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...