Help With Replacing A/c Lights

[Fujiwara]

Hey guys.

Just wonering if anyone around Sydney has performed the light change for the A/C

I got the bulbs off Dan but i don't know how i can solder these on etc.

I will drive there if you can help me.

Please gimme a hand if you can.

Please contact me on 0433 230 959

Paul

[D_I_F]

Hey guys.

Just wonering if anyone around Sydney has performed the light change for the A/C

I got the bulbs off Dan but i don't know how i can solder these on etc.

I will drive there if you can help me.

Please gimme a hand if you can.

Please contact me on 0433 230 959

Paul

I'm pretty sure there is a DIY on this in the DIY section..

[Fujiwara]

If you're talking about http://www.skylinesaustralia.com/forums/in...=172061&st=

I've already read it and it doesn't help as the lights are different

Just need to know if anyone around here has done this possibly on a R34

[D_I_F]

If you're talking about http://www.skylinesaustralia.com/forums/in...=172061&st=

I've already read it and it doesn't help as the lights are different

Just need to know if anyone around here has done this possibly on a R34

What kind of bulbs are they?

[Fujiwara]

Hey mate,There are 3 LED's which came with their own holders.

And there are 3 x T5/T10 bulbs with no holders.

[ZENNON]

donno if this would help...

http://www.skylinesaustralia.com/forums/in...howtopic=135239

[petern]

did you see this thread

http://www.skylinesaustralia.com/forums/in...howtopic=172056

there was final pics of the lights in evesdropping first reply

i haven't done it yet, still have to buy the LEDs

[Fujiwara]

ok...fixed the LED's...

just found out i need to solder the actual lights onto the circuit board.

Gotta get someone with a soldering iron now

[MANWHORE]

I'm good at soldering and i'm in sydney. Where abouts are you located?

[Fujiwara]

I'm in Carlingford.

[DRD-00F]

lemme drive your car and ill do it

also, you have to come to me

[Fujiwara]

did you see this thread

http://www.skylinesaustralia.com/forums/in...howtopic=172056

there was final pics of the lights in evesdropping first reply

i haven't done it yet, still have to buy the LEDs

The lights aren't exactly the same as the ones in Dan's thread.

The lights i have are longer and hence i need to chop off the base of the light if i was to use the existing holders.

Don't know if i can cut these off though

[MANWHORE]

well, I'm in st ives, so not too far away. Pretty busy though. Gratuities are always welcomed

[Fujiwara]

Just an update guys.

I managed to fit them in with no soldering required.

Might write up a DIY when i have time.

All i did was to trin down the LED base and the OEM holders and wire up the wires into the factory holder positions.

Then i simply screwed them back in and wallah!

WOOT WOOT!!!

All looks good now.

Thanks for the offers guys.!!!!

[evesdropping]

isn't that what it said to do in the DIY thread?

[Fujiwara]

isn't that what it said to do in the DIY thread?

If u have a R34, u know the globes will not fit in the holders no matter how much trimming is done.

I had to improvise and just let it hang on to the holders with th wires holding it in place.

[evesdropping]

If u have a R34, u know the globes will not fit in the holders no matter how much trimming is done.

I had to improvise and just let it hang on to the holders with th wires holding it in place.

I see...

It looks pretty good a?