Jump to content
SAU Community

Fog Lamps, On Or Off  

51 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

If you read the road and traffic authorities handbook of your state - it would clearly tell you what Foglights can only be turned on when... it is foggy, in raining conditions or when the visibility of the road is impaired and therefore needs additional lights.

You can get pulled over for this - I would not turn them on ever so often, mate.

Link to comment
https://www.sau.com.au/forums/topic/177101-fog-lamps/#findComment-3236503
Share on other sites

Like 10% of cars i see have them on so they cant be that illegal. i know its a way that cops can have a go at us on a friday night when they are bored. but my uncle is a sargent @ corio police station and half of our family drive with them on, he says nothing.

Link to comment
https://www.sau.com.au/forums/topic/177101-fog-lamps/#findComment-3236554
Share on other sites

the ones that are on the series 2 skylines are driving lights so its not really illegal to have them off.

iv had mine on everynight since iv had it. used it during the day to when it gets a bit dark. looks cool with only the parkers and driving light on.

but ye if you have fog lights which ae yellow they must only be used in foggy conditions thats why its yellow so it dosnt reflect much and cuts through the fog.

Edited by ashneel
Link to comment
https://www.sau.com.au/forums/topic/177101-fog-lamps/#findComment-3236827
Share on other sites

Driving lights and fog lights are the same thing. They are illegal unless as stated above it is foggy, or poor conditions such as rain, snow etc. You can and should get booked for them being on.

HOWEVER, it is proven fact it is safer to be driving around with your HEADLIGHTS ON (which should be correctly aimed, you can also receive a defect for that...) Other cars, and road users can see you far easier, and from futher away with them on.

Link to comment
https://www.sau.com.au/forums/topic/177101-fog-lamps/#findComment-3236854
Share on other sites

used to use them all the time....but now just have the standard head lights on. But when I go late night cruising up the mountains, then i have them on. But there are heaps of other cars that use fogs/driving lights at night. People think its bad when we have it on...have u seen 4wds when they come on the opposite lane with their fog lights on....now THATS blinding :)

Link to comment
https://www.sau.com.au/forums/topic/177101-fog-lamps/#findComment-3236933
Share on other sites

I have them on my Supra.

Only time they get turned on is when it is:

a) Foggy,

b) Rainy

c) Some idiot came up behind me with his on, so I get behind him and flick them on and off.

I hate people who have them on, unless they're needed!

They're just wanker lights.

Also, there IS a difference in driving lights and fog lights

Fog lights: Yellow lense, low power, used to cut through fog to give better visibility, able to be turnt on and off WITHOUT headlights being on.

Driving lights: White lense, generally high power (Except in wanker cars like SS commodores etc). These lights by ADR/Law are only meant to be able to be turned on whilst your HIGH BEAMS are on.

FYI: It is a $75 or $77 offence in NSW to have your fog lights on when not needed.

Having driving lights on is the same offence as not dipping your high beams.

You have been warned.

Link to comment
https://www.sau.com.au/forums/topic/177101-fog-lamps/#findComment-3237802
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...