Jump to content
SAU Community

Those Little Extras For Your V35 Are Cheaper.

Guest

By Guest,
in V Series (V35, V36, V37 & Infiniti)

 Share

Recommended Posts

Guest

Guest

Posted
Posted

As we all know the dollar is so strong so I logged onto http://japanparts.com/ again and ordered a Nismo Dash (280km/h and 8000rpm in white for $650 plus freight) and some other little things, so for the guys who asked me about the clear indicators, the factory painted body kits or the 3.8 litre stroker kit the prices are that much better, well no one asked for the 3.8 stroker kit but I threw it in.

And for the Transmission Oil guys this is were I get it from so for OEM bits not listed like the oil to make life easier and a response quicker email the info below to suit your car to [email protected] and it goes direct to Graham.

DETAILS REQUIRED

Name:

Address:

Phone:

Fax:

Email:

VIN NUMBER

CHASSIS CODE

MODEL

OEM PART NUMBER IF KNOWN

PART DESCRIPTION

COMMENTS

Guest

Guest

Posted
Posted

You order it to suit the car with the VIN number if you want to be exact, CPV35 Manual or Auto, NAV System or not, they are made at time of order by Nismo and it is 3 to 6 week wait with no return if they don't work (a Nismo thing).

I fitted one to my car to make sure it worked and it was out of a CPV35 manual with NAV even though mine is 6 speed 4 door with basic Double DIN fitted, why Nismo say this I do not know.

If you order one for your VIN giving all the info I cant see a problem but it is up to you.

  • 5 months later...
rs73 Grand Master

rs73

Posted
Posted

Has anyone ordered the impul high power ECU from japanparts? Not sure if that's for manual only or will work with auto or not.

http://www.japanparts.com/db/category.php?...er=5&car=76

It's under ECU. You'll need to give your ECU part number so they can register it with the factory immobiliser from Nissan, otherwise probably you won't be able to start up the car. that also means that very likely people cannot trade these ECU as second hand unit because it won't work in another car.

  • 10 months later...
manda23 Community Regular

manda23

Posted
Posted
Has anyone ordered the impul high power ECU from japanparts? Not sure if that's for manual only or will work with auto or not.

http://www.japanparts.com/db/category.php?...er=5&car=76

It's under ECU. You'll need to give your ECU part number so they can register it with the factory immobiliser from Nissan, otherwise probably you won't be able to start up the car. that also means that very likely people cannot trade these ECU as second hand unit because it won't work in another car.

I have that high powered ECU in my car thats getting complied , what does it do and what good is it. I'm having a feeling the petrol here will be a problem for me.

Stephen Thorpe Proficient

Stephen Thorpe

Posted
Posted

Avgas is race engine (aircraft fuel in most cases) and comes at various specific octanes, sometimes at 110 octane (or it used to be available like that).

It smells sweet when being used and will boost most standard octane ratings, I have run it in carby jap motorcycle engines at about 30% ratio, but it was never very cheap.

Is also a bit hit and miss, but never caused any problems to me.

I am sure that you could still get it to raise the octane level of the crap Aussie fuel, however I would doubt there is really a need in a light tune V35.

You also need to be very careful that you get it right, so do a lot of research and tune on a Dyno.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...