Jump to content
SAU Community

Recommended Posts

hey guys

ive got a missfiring problem. its been happening since ive had a tune. and starts at 5000rpm as soon as it goes over 13psi.

i have changed my plugs 4times and different heat ranges now at different gaps 1.0, 0.8 and 0.75mm. and still missfiring. i also got sum Splitfire coilpacks and still missfiring. ive also got a new 040 fuel pump and new Z32 AFM. the only thing i can think of is the CAS. could this be the problem???

my mod's are

K&N pod fillter

3" exhaust turbo back

Plazmaman Plenum

cooler 600x300x73

R33 GCG high-flow turbo

Z32 AFM - in cooler piping

Bosch 040 fuel pump

new GTR injectors

Splitfire Coil Packs

also did a comp test and it was

1 150

2 150

3 138

4 148

5 150

6 150

cheers

bill

Edited by JETR-32
Link to comment
https://www.sau.com.au/forums/topic/177405-r32-missfiring-problem/
Share on other sites

well when it was on the dyno the first run it did 212rwkw's and still lots more to go :ninja: after that it never hit that again. it was losing power each run. i check the piping like 10times.

ill check the crank angle sensor and the ignitor

cheers

bill

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
    • Yes it is ATF. I quote @Duncan "it takes a good synthentic auto trans fluid like Castrol Transmax Z" It's not a diff. It's a transfer case. Totally different thing. Yes, fluid will come out the sender hole. No you do not really need to drain it. Just pull the old, quickly poke the new, clean up and top up. But realistically, you should probably take the opportunity to change it anyway.
×
×
  • Create New...