Jump to content
SAU Community

Recommended Posts

  • Replies 175
  • Created
  • Last Reply

Top Posters In This Topic

hey R DIRTY 3 just letting you know i sent you a PM as i cant find it in my sent folder

Yup i got it and have replied.

Gazza, yeah mate CAMS will recognise them. I have it in my car and never been questioned about it. And i asked Revolution Racegear and he said that its the minimum they accept at Wanneroo etc.

Where is a good place to put it?

While on the street I was going to bolt it into the boot somewhere..

While on the track which I wanna give a go.. maybe just infront of the passenger seat on the carpet as close to reach for driver as possible?

Any other ideas?

Where is a good place to put it?

While on the street I was going to bolt it into the boot somewhere..

While on the track which I wanna give a go.. maybe just infront of the passenger seat on the carpet as close to reach for driver as possible?

Any other ideas?

Front Passenger floor is normally a good spot for it. I know a guy that is going to try to make a bracket to mount where the seat bolts on so i dont have to drill holes in the floor...also consider mounting it to the tunnel behind the centre console?

Front Passenger floor is normally a good spot for it. I know a guy that is going to try to make a bracket to mount where the seat bolts on so i dont have to drill holes in the floor...also consider mounting it to the tunnel behind the centre console?

Are you allowed to remove your passenger seat while doing track in a street car? If so that'd be sweet bolting to to the rails.. I don't think it needs to be in the cabin while normally driving on the street.. I wouldnt trust silly drunk passengers :)

yes you can take out your seat or you can just get a piece of metal that extrends from each bolt that holds the fron of the passanger side seat in, you then attach the bracket that the fire extiguisher comes with to that :)

only problem in a 33 is that the seat has to be adjusted all the way back to make it fit :)

id post pics but im at work

p.s. brad, i want one now lol i wanna replace my supercheap auto one :)

Can I offer some (maybe worthless) advice?

Make a bracket to bolt the extinguisher to the front of the drivers side. If you bolt it to the passengers seat you will always have problems with clueless chumps smashing the seat into it when the move it back/forward etc. If it is infront of you then you know it is there & you won't damage it or the seat.

Secondly scrutineers much prefer it if you can reach the extinguisher from where you are sitting.

yes you can take out your seat or you can just get a piece of metal that extrends from each bolt that holds the fron of the passanger side seat in, you then attach the bracket that the fire extiguisher comes with to that :)

only problem in a 33 is that the seat has to be adjusted all the way back to make it fit :)

id post pics but im at work

p.s. brad, i want one now lol i wanna replace my supercheap auto one :)

$50 to you! :)

Make a bracket to bolt the extinguisher to the front of the drivers side. If you bolt it to the passengers seat you will always have problems with clueless chumps smashing the seat into it when the move it back/forward etc. If it is infront of you then you know it is there & you won't damage it or the seat.

Agreed :)

Guys so far we have the order looking like this:

Strich9 x2

342Four x3

Go 33 x1

Bubba x2

Lukits01 x1

Daniel R32 x2

RDirty3 x1

7yphon x1

Ossie 21 x1

Fr0st x1

PX29 x1

Hazerb30 x1

Woodys x1

MIKE R32 GTR x2

Onthehunt x1

Bok boK GuN x3??? To confirm

Ztuned x1

3R1K x1

DiNoBoNeS x1

Sky Ryan x1

Gazza750 x1

R32SkyRine x1

Kuju x1

Lach 32 x1

Sam5709 x1 (special price $50)

WhiteHot R33 x1

pism x1

Munster x2

Gabbo2047

TOTAL 38

If anyone wants to add to their order or cancel or change it in anyway now would be the time to let me know. I appreciate the support from you all on this.

Ill be sending PM over the weekend to everyone on this list advising of payment methods. I wont be ordering until Thursday 2nd August so it would be really good if we can have all payments sorted by then to confirm the order, as they wont be dispatched from the east until payment is made.

Thank you all

Brad

p.s. Bok boK GuN, have you had confirmation yet?

ill have one please , btw is there any problem with boltign it on passenger side of center console , will i get introuble with the men in blue ?

o i livein rockingham and ill pay for postage if u dont mind sending mine if im notto late

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...