Jump to content
SAU Community

Full Carbon Fibre Bonnets For R33,180sx,s14a, Civic, Rx8, Evo8

dori34

By dori34,
in Group Buys

 Share

Recommended Posts

dori34 Grand Master

dori34

Posted
Posted (edited)

anyone interested in a full carbon fiber hoods for R33 GTST S2 (96-98)?

frp + cf on top

price will be $650 + delivery or pick up in sydney.

group buy will start as of today(24/07/07) and will end in one months time (24/08/07).

i need at least 5 people or more to get at this price.

the company that is doing this for me is jap bodykits.

production time is roughly 3-4weeks + whatever it takes to get delivered to your place.

only one style available atm.

refer to pics below (R33 only) i am waiting for the 180sx one to be made up and sent to me so i will have pics of that up asap to show how it fits and quality etc so you guys can wait until i get pics up then you can start deciding to buy or not....

r33hoodmv5.jpg

1. 180sx bonnet

2. 180sx bonnet

3.

4.

5.

i can also get cf bonnets for 180sx, evo8, rx8, s14a 200sx & 92-95 honda civic. these can be bought through group buy as well at $680 per bonnet otherwise its $800 normally.

more pics upon request of other vehicles.

any questions please feel free to pm or reply here :P

update

also i will be needing $400 deposit upfront to make sure you are definately in as i dont want to bring them in and people back out and change their minds meaning ill be stuck with a bonnet and $650 out of pocket.

need 3 more people for this to go ahead at this price.

cheers

Edited by whyte
  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

dori34 Grand Master

dori34

Posted
  • Author
Posted
Can you get them for the series 1? and what other carbon parts can you get?

only bonnets at the moment.

are series 1 and series 2 bonnet shape different or the same ?

like i said above, the supplier said it suits 95-98 model R33 gtst.

dori34 Grand Master

dori34

Posted
  • Author
Posted (edited)
95 is a series 1.5. not a full series 2, would be better advertising as for 96-98

thanks for that champ i will edit the post :laugh:

so your selling seibon products? or are these bonnets being made in oz?

narh not seibon products. that picture was illustration purposes only.

they are being made in china.

nothing for the r32?

sorry sofly, only for the cars listed.

how much is postage to perth?

postage would be a rough guess at $100-$150.

any chance for a Stagea series 1? And how much?

sorry stasis but only for the cars listed.

r32 gtr?

once again, only available for the cars listed.

however i can get R32 vented frp/cf bonnets if someone provides me with a prototype (stock bonnet, vented whatever) and i can get that copied and made in either FRP or CF. would need at least 8-10ppl for this to go ahead.

i made a group buy thread about this before but didnt gather enough interest so didn't go ahead.

Edited by whyte
ztuned Mentor

ztuned

Posted
Posted (edited)

would it be possible to post 2 at the same time to perth for cheaper postage if i find someone esle in perth thats interested?

for series 2 r33

Edited by ztuned
sam5709 Grand Master

sam5709

Posted
Posted
would it be possible to post 2 at the same time to perth for cheaper postage if i find someone esle in perth thats interested?

for series 2 r33

i would like to know this aswell as im in perth :laugh:

dori34 Grand Master

dori34

Posted
  • Author
Posted
would it be possible to post 2 at the same time to perth for cheaper postage if i find someone esle in perth thats interested?

for series 2 r33

i would like to know this aswell as im in perth :)

that would be fine ztuned/sam5709 but it can only go to one address in perth.

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Squeaking clutch/throw out bearing

      By joshuaho96 · Posted

      How would you even adjust the clutch if the pedal already has the correct free play? The operating cylinder has no adjustment in mounting position or rod length. On pull style clutches there is also no ability to adjust the bearing carrier. Push type I can see how adjusting the carrier height makes it all work.   If this is the twin plate clutch did you verify that your friction disks were oriented correctly? It's not mentioned in the directions at all you just have to notice that one side the friction disks have a part number on the hub fingers and a subtle coning to those fingers. Another thing that I noticed was if you put the friction disks in backwards the pressure plate fingers will not be even and flat when the clutch is installed.
    • Dobz
      [Geelong,Vic] Used: pull type R33 GTR gearbox (no transfer case), Nismo super coppermix twin plate clutch

      By Dobz · Posted

      price drop $1000 gbox $400 clutch
    • sonicii
      Who has a Infiniti Q60, Q50 (V37)?

      By sonicii · Posted

      yeah, mechanically, it is probably do-able, off the top of my head, there would be the transfer case, which I believe will bolt up to the rear of the RWD transmission, the shorter rear tail shaft. A front drive shaft, front diff, engine upper sump, front drive shafts, front hubs and front AWD struts (they are shaped around the front drive shafts), LCAs (at the very least from the front suspension) oil cooler.  You might want the rear diff from an AWD too, so you can be certain the front and rear diff rations are identical.  Who knows what brackets and mounts you might need.  So a whole doner car might be the best option if you need to maintain RHD. Then actually making it work, that would be a whole different story.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Take the fall as a warning sign for future endeavours  Stay safe mate
    • Alex.LA
      R34 GTR Vspec Garage Sale - All must go!

      By Alex.LA · Posted

      hi mate, HKS cooler piping still available by any chance?
×
×
  • Create New...