Jump to content
SAU Community

Recommended Posts

Well I just did 225km since posting last. Went through the Nasho, stopped at Thirroul for a coffee, up Bulli Pass, Appin road to Campbelltown and then over to Oran Park to catch up with a few SAUers who were tracking it. Went back home the same way. Saw a few cops and had no trouble as I was doing it leisurely as we will on the cruise I'm organising.

  • Replies 135
  • Created
  • Last Reply

Top Posters In This Topic

Well I'm thinking the 20th because a few people have told me they can't do the Saturday. Have you booked already Johnno?

Event thread.

Yeh i booked my eastern creek track day for the 20th!!

Shit shit shit the ride day is the 20th :yes: dammm

I unfortunately don't think i'll be making the ride day on the 19th..

Had my first bike accident on monday night. Was riding home from my gf's parents place about 9:30, she was in front in her car. Coming down towards the bottom of cattai ridge rd in glenorie if anybody knows it, Pitch fkn black at night time, windey, very narrow and no street lights... well there was 2 HUGE black cows walking on the side of the road! She broke pretty hard but by the time i came up to them they were walking towards the middle of the road & saw them last second. Hit front brake tried to hook it right, front wheel lost traction and lowsided. My knee, helmet, and forearm bit the tarmac..Bike went sliding down the road about 20m or so. My gf in front turned around and was pretty hysterical, worse than me haha.

There's a few properties near where this happened so just trying to find out who owns these fkn cows and tell them what happened!

Ah well, bike will be fixed and i'll be right as rain soon. Every bike rider knows this will happen one day, im just glad it wasnt any worse. My jacket, gloves and helmet are scratched up and ripped my right knee outta my jeans..theres a 2m long mark on the road from my jeans, little bits of denim stuck in the tar haha.

Bike is in at Hawkesbury Honda getting quoted up for the repairs..

Jono

Pics

DSC00024.jpg

DSC00029.jpg

DSC00022.jpg

DSC00021.jpg

Edited by GTR032
You're obviously bike mad Large so I am assuming "1990 Gsxr1200" is a typo.

Looks fairly superficial at least Jono, race tape a new indicator on there and lets go!

No not a typo.

It's a 1201 big bore GSXR motor in a 1981 Katana frame with GSXR usd forks, swinger, dash etc

post-45295-1200140399_thumb.jpg

Edited by Large

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
    • hahah when youtube subscribers are faster than my updates here. Yes some vid from the day is up, here:  Note that as with all track day videos it is boring watching after the bloopers at the start.  The off was a genuine surprise to me, I've literally done a thousand laps around the place and I've never had instability there; basically it rolled into oversteer, slipped, gripped and spat me out. On the way off I mowed down one of the instructor's cones and it sat there all day looking at me with accusing cone eyes as I drove past. 1:13:20 was my fastest lap, and it was in the second session, 3rd lap.  It (or me!) got slower throughout the day as it got hotter.      
    • It sounds like you want what the Toyota Landcruisers have for their roof racks. Wanna know what you end up with? Rust holes in the roof, and water everywhere...
    • Discovered today that if I select reverse first and take my foot off the brake, then select drive, the drive indicator light works and so does the tiptronic gear indicator. 
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Does anyone here have any ideas?   Cheers guys
×
×
  • Create New...