Jump to content
SAU Community

Recommended Posts

93 R33 GTST $12000 ONO SOLD!

This is a private sale on the Sunshine Coast

I'm posting for a friend.

The car is Stock except for a cat back zorst and custom HD clutch which is 9 month old, the car is complete & running. (Currently registered & complied).

He is Selling Unregistered. And in AS IS condition.

Silver two tone in colour.

Engine and drive chain is in very good condition as are all panels and interior & trim.

(The car drives very nicely I have driven it quite a few times) the owner has been changing oil and filter every 5000k without fail there is about 80thou on the clock.

The owner just needs to get rid of it and can't afford to fix the chassis rust in it for a roadworthy. The car was purchased about 10 months ago for $21000 from a Brisbane dealer.

email me or pm and I will pass on the owners phone number.

Link to comment
https://www.sau.com.au/forums/topic/17903-93-r33-12000/
Share on other sites

to do work like that the interior will probably have to be removed to get to the chassis

but i don't imagine the work itself being that difficult...i mean it wouldn't cost that much to fix and at 12k its pretty good value (pending condition of the rest of the car)

Link to comment
https://www.sau.com.au/forums/topic/17903-93-r33-12000/#findComment-376210
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
    • That's my life. Past-Duncan has a lot to answer for
×
×
  • Create New...