Jump to content
SAU Community

Recommended Posts

hi guys, i recently had a flat battery and when i tried to start it it turned over slowly but then my power fc when a bit funny. I replaced the battery and turn the ignition on and the power fc has now reset itself back to its stock map, WTF, anyway car starts but is very rough idle and pours heaps of black rich smoke, so i booked it into the tuner to get tuned..but i decided to change afm since the rb20 one was maxed out in the last tune, so i went with the q45 afm, its all wired up sweet done a sensor check on the power fc everything reads fine, but now the car just turns over and does not fire one bit, so i put the old afm back on and it still does the same thing, so i pressume its nothing to do with the afm's. I havent checked as of yet if i have spark or not, but does anyone else know what what i could check on why it isnt firing anymore. My 32 has:

rb20det

td06-20g

gtr injectors

power fc

bosch fuel pump

tomei cams

nismo headgasket

power fc boost kit

hks front mount

thanks,

luke

Edited by Waldo
Link to comment
https://www.sau.com.au/forums/topic/179395-car-wont-fire-anymore/
Share on other sites

Check you have fuel pressure...

Then check your plugs.....you could have flooded the motor with fuel.

If they are ok...then your powerfc may have to be tuned...because if it reset..the injectors

would have not have been entered...nor your afm....

Hope this is of some help...

take the plugs out and kick the engine over, see how much fuel comes out, if its just spraying its ok. if there's alot its over fueling. try narrow down the problem, like d/c the fuel pump relay then check injector pulse and maybe unplug the injectors them selves.

even try cleaning the coolant temp sensor.

if theres a lack of fuel try blocking the top fuel line that goes to the FPR with ur finger and crank the engine to see if there's pressure.

you will know it if there is >_<

do all that and you will have a better idea what the problem may be

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...