Jump to content
SAU Community

Plz Look At My Dyno Read Out


Recommended Posts

hi i hav a skyline r33 gtst auto, my mods are turboback exhaust, greddy fmic, blitz podfilter, greddy emanage, and dual stage boost controller, i recently put the e-manage in n got it tuned with new spark plugs. it dynoed at 194 kilwatts at 14psi, but as u can c in da readout ders a massive power loss, and den it shoots back up, my mechanic said ur cam timing is mostly likely out, i just wanted to know that when the cam timing is fixed if that is the problem, if i will gain more kilawatts, and secondly with the mods i have, is the kilwatts matching the mods i have?

post-35445-1186494110_thumb.jpg

Link to comment
Share on other sites

wouldnt have a clue, only had the car for a year, i remeber when i was installing the exhaust, the mechanic said something bout the 02 sensor but i cant really remember exactly what 4

Link to comment
Share on other sites

looks to me that he didnt touch anything on the map before 5000rpm (i.e. r&r looks like its still there).

timing is adjustable with the emanage so that was purely an excuse to cover for his shit tune.

did you get an AFR readout too?

Link to comment
Share on other sites

I know its quite obviouse on the dyno graph that theres a big flat spot at 4000rpm, but have you noticed this before?

It may just be in this guys tune and hes looking to get a few more $$$$$$ from you, I've seen this happen before.

Link to comment
Share on other sites

my guess is that your coils or plugs aren't coping with the boost and it is missfiring, then coming good up top. what gap are the new plugs, and what sort are they?

when i get a hold of ucd15r33's dyno graph i will post it. it did the same thing. there is a big dip in i where it misfired then came good, and his doesn't have rich and retard.

Link to comment
Share on other sites

thats boost, not afr

the boost is all over the place, and too high for a stock turbo

the highest boost is at the worst power. could it be the stock turbo not dealing with the boost level too well?

Link to comment
Share on other sites

looks to me that its too consistent to be a coil/spark issue. and it handles it well after what looks to be 5000rpm.

if it was a spark issue then that would've been the excuse his tuner gave him, not the timing one.

im going to go out on a limb and say that the tuner didnt know how to tune out the R&R, so he said something was wrong with his timing.

ive seen better tuning on a safc. scratch that... ive seen better curves on a standard ecu!

if i was you i'd go back and make him fix it. if he cant then make sure you get your money back.

Edited by SECUR1TY
Link to comment
Share on other sites

ive seen better tuning on a safc. scratch that... ive seen better curves on a standard ecu!

the best curve i have seen was on a stock ecu on my last magna. it was perfect. no spikes, nothing.

Link to comment
Share on other sites

maybe thats when vtek y0! is kicking in? ;)

if not then i agree with the below

im going to go out on a limb and say that the tuner didnt know how to tune out the R&R, so he said something was wrong with his timing.

if i was you i'd go back and make him fix it. if he cant then make sure you get your money back.

Link to comment
Share on other sites

who tuned your car

go to a new tuner

get a better boost controller

edit - tune first as there MAY be a link between the two issues

Edited by VB-
Link to comment
Share on other sites

i'd say timing, boost controller and rich and retard....

seems like boost is spiking hard and then the car goes into R&R.... dunno if its coilpacks cos theres no way it'd hit 194 kws with faulty pack.

so i agree with VB

new controller,

new tuner

good luck, let us know how it goes.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share



  • Similar Content

  • Latest Posts

    • Got some decent progress after work yesterday and also today. Got the ECU all wired and passenger side interior all back together. Kept the wiring up nice and high to avoid people standing on it. Got the surge tank relays rewired and tidied up the pump wiring and cut a hole to bring the cables through.  I found a spare USB cable I had lying around so I decided to cut it up and see if I could use it for my CAN 1 bus. Turned out one of the pins I needed was to the shield of the cable so i cut it up and desoldered it and resoldered to the correct pins.  Had the issue with the powersteering hose hitting the A/C compressor and fan shroud. I pulled the bracket off and modified it to remove the front mounting point which now clears it all. Will keep an eye on it to see if theres any signs of fouling once it's up and running.
    • That's some good input mate. Nice.
    • So today I went well outside my comfort zone (again) to replace my valve cover gasket.  I have had a big leak over the exhaust leading to a lot of smoke and smell every time I drove it. The leak was in the rear driver's corner.  The job wasn't hard as such, just a bit finicky and time consuming.  The old gasket was rock hard and broken right where the leak was.  The leaky corner had so much sitting oil in it.  The good news to my amateur eyes was no buildup or sludge under the cover. It all looked fairly nice in there.   I haven't started it yet. I ran out of light and body when putting the coils and injector loom back in. Probs only 30min left for the morning.  I was so nervous putting the cover back on, I must have lifted it 5 times to make sure the gasket was still seated properly. God it's going to be nice to be leak free and not make other traffic light queuers think my car is about to explode.
    • Gave the Mazda it's first wash, it will need some clay, a light compound, and polish polish to remove a few swirl marks, but that will be a job for when I have a full day to get my DA polisher action on
    • Just did this job on my 32 with the boost doc kit. was quite simple to fit, hardest part was getting the rubber bungs back on the firewall. does anyone know how the heater will work now without the flap in the bend? Will I just have a heater on 24/7 now?
×
×
  • Create New...