Jump to content
SAU Community

Recommended Posts

Steve from SST will do it.

There is good reason to get it done. I have seen some serious dodge home installs. Some so bad they affect the entire running of the engine.

Also SST will whack it on dyno and check AFR's for you.

No - oh lets just test out if it works = ping ping ping.

thx Bam i spoke to Xspeed...just seeing if anyone had any recommendations. I like Technik, they do tidy jobs but are on the more pricey side.

Adam32: i was going to try it with a friend, but if it wasnt to expensive to have done, i could do without the headache of not having a car for a day or more as i figure this out how to do it.

would have to dyno after too

gain can be calibrated on the road - is probably the better way to do it as dyno loading cannot always accurately represent driving conditions.

workshops shouldnt charge more than an hours labout - $50-$60. just go wherever is closest

with pinging etc everyone knows what setup allows what boost you can run unless youre at the other end of the scale with big turbo and fuel system.

its a long story ...... but i dont think he wants to talk about it haha Dans car has a wiring mess and so it took a little while longer ..... hmmm well a lot while longer then his car didnt like its EBC being ripped out and he spent about 45mins pulled over in the emergency lane of Graham Farmer trying to figure out why the car wasnt working (vibratin n stalling frequently) - after some more dodgy wiring he limped it home. Poor guy but im sure he'll have it sorted soon tho - just the night didnt go well for him at all :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...