Jump to content
SAU Community

Recommended Posts

Hey guys just a quickie,

Im getting a custom turbo back exhaust put on tues @AAA on recommendation from countless of you out there. Just wondering what size canon 2go? I want a similar one to that of Trust PE2, so question is does it have a 5" or 6" barrel? They recommend 6". Thanks in advance!

Link to comment
https://www.sau.com.au/forums/topic/180877-trust-pe2-muffler-size/
Share on other sites

I'd go with their recommendation of 6" barrel & you shouldn't have probs with ground clearance.

according to nengun, the tail is 11.5cm. divide by 2.25 to get inches gives you 5.1 inches
there's 2.54cm in an "inch

Just checked with various suppliers & they all said the same, it is 4" barrel so it tucks under nicely & has a sweet note. So if i go with a 5" i think id be pretty safe with clearances, sound/note & performance.

Total damage was going to be $1350 from the turbo back, besides the piping this included magnaflow highest flowing cat & magnaflow muffler. Now i've just decided to get the PE2 installed which is $899...just in the nick of time cos the YEN has dropped & the new price is $980 installed :rolleyes:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That still isn't a lot to go on. I don't have a Y50 Fuga Head Unit wiring diagram. I can say that a lot of nissans of that age shared head unit plugs, so if you are in Australia something like this would probably help: https://aerpro.com/app091# You plug that into the car loom, then either plug the head unit ISO into that (if it has ISO), or you buy and ISO adapter harness that you wire in. Bit of stuffing around, but once you have ISO its easy to change things in future.
    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
×
×
  • Create New...