Jump to content
SAU Community

Recommended Posts

I read the specs on the stagea a while back as I am havin a good think about getting one someday, and wondered what they perform like in the everyday carpark scinario. Turning circle in the specs = 5.3 metres, and that's huge! Can you get a steering rack that makes the turning radius smaller?

Link to comment
https://www.sau.com.au/forums/topic/181049-stageas-in-carparks/
Share on other sites

Huge? are you used to driving a barina or something?

Turning circle is hardly a factor i'd decide whether a car is good or not. I mean, I have a skyline - same gear. I have never found it a PROBLEM. e.g. I don't go oh shit, ran out of steering lock when trying to park...

In answer to your question, yes you can

Barina - no. Ford Laser - yes. it has...or should I say - had, a nice small turning circle. Thanks for answering the question too. I don't rate it steering as a major factor, but thought i'd throw the questions out there.

Well, as a direct comparison to my last car (eb falcon) I think the stag parked beautifully. Before you compare it to a laser, you may want to compare the wheelbase and interior space too.....

The Stagea has a pretty decent turning circle considering the fact that there are drive-shafts running to the front wheels too (unless you go for a RWD version). I came from a Corolla, and my old man still has a 2003 Camry. The turning circle on the Corolla was great (obviously, because it was a small car), but the Camry's turning circle is worse than my car's...

One thing with the Stagea is the rear overhang, but what's good is that the rear window is almost vertical, so it's pretty easy to judge how much room you have behind you if you reverse park into a spot. It's also good because it makes the load area much more useful, compared to a hatchback or a wagon with a steeply-sloping rear window area.

FFS you buy a car and you are worried about the tunring circle? Forgive me for saying this but how long have you had your license for?

In a car thats 4wd the turning circle is going to be always a large one. It doesnt mattes wheter is a sedan or suv. Why? Like they say theres Cv joints in the front wheels that drives it. Thats the factor that limiting the turning circle. Get it?

Driving skills is all you need to drive in a car park. One advise when driving such a long vehicle always go for a rear entry :P:D . Which means rverse in instead of parking head in first try it.

Rather than start a new topic i'm going to follow on with a similar question:

How's the reverse parking go with the Stagea? I'm coming from a Subaru Liberty Sedan and it's easy enough to park in tight spaces - I"m guessing Stag's aren't too bad in that respect?

Rather than start a new topic i'm going to follow on with a similar question:

How's the reverse parking go with the Stagea? I'm coming from a Subaru Liberty Sedan and it's easy enough to park in tight spaces - I"m guessing Stag's aren't too bad in that respect?

Like I mentioned above, Ian, having a good-sized rear window and an almost vertical tailgate helps heaps. You know that if there's roughly 2ft to the rear window from a wall, that roughly half of that should be left for the bumper. Of course, if you're gonna open the tailgate later to get the shopping in or whatever, don't forget to leave more room.

I find it enormously better than my 70 series Supra in carparks, for the simple fact that the Supra's doors are about 3 km long, and you had to take at least 6 months of yoga before even contemplating using anything but the aerotop for ingress/egress. Sure, the turning circle is a little wider than a Lotus Elise, but it's a Large car!

Ive never had an issue in a carpark and ive had to park in some stupid stupid spots.

On another note, want more lock, get aftermarket tie rod ends and adjust them for more lock, then a wheel alignment to adjust toe.

Otherwise, remove the rod ends and insert some spacers, aka washers, when screwing the rod end back in. This will do the same thing but in a less safe more borro drifter kinda way....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...