Jump to content
SAU Community

Recommended Posts

Hi Everyone

We're conducting a High Performance Training and Track Driving Day at Broadford on Monday 10th December

We will be running the day as an 'open pit lane' day, but we will also have 4 qualified (Certificate 3 and 4) instructors with lots of experience.

We also provide lunches, tea / coffee / soft drinks / cake !!, flaggies and Racesafe medical / rescue crew.

You do not need a CAMS or ASSA licence to participate in our High Performance Training and Track Driving Days

The format we run to is: 3 groups of ten drivers, twenty minutes of track time per hour.

Start time is 8.30 am for safety briefing, track is open from 9.00 am until 4.00pm

Cost is $285.00 per driver.

Check with your insurance company, they will most likely cover you for one of our training days.

If you would like to come along please let me know via email [email protected] or call me 0413 540 197

Please dont send me a pm.

Regards

Kev

post-3810-1187230659_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/181101-broadford-trackday-10th-december/
Share on other sites

  • 4 weeks later...

should be fun,

i might come along it depends on whats happerning with the car, and xmas holidays as i think i go to qld that day.

and al thanks agan for the brakes man they help great at sandown evne got me brakeing point down to less then 100m on the front straight

should be fun,

i might come along it depends on whats happerning with the car, and xmas holidays as i think i go to qld that day.

and al thanks agan for the brakes man they help great at sandown evne got me brakeing point down to less then 100m on the front straight

  • 2 weeks later...
  • 1 month later...
  • 2 weeks later...
  • 2 weeks later...

was a kick arse day held by Kev and the crew.

hopefully find some pics that some guys took...perfect weather and perfect conditions. Worth the money for the 30+ laps I got to put in.

thanks Kev and Driver Dynamics.

was a kick arse day held by Kev and the crew.

hopefully find some pics that some guys took...perfect weather and perfect conditions. Worth the money for the 30+ laps I got to put in.

thanks Kev and Driver Dynamics.

Yeah

It looked like you got in 100 laps or even more

Yeah

It looked like you got in 100 laps or even more

my tyres look like I did 100 laps ! hehehe

nice work on that corner...I think I got it right a few times :(

just looking for that guy who had the Civic Version R, he would have had some sick vids and photos. Do you know which club he is with? Doesnt look like he is with the RX8 owners club..

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...