Jump to content
SAU Community

Recommended Posts

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

Nothing wrong with Frankston, Seaford, Carrum etc still reasonable and you have the beach lifestyle, nothing beats a walk along the beach, whether in winter or summer. There's also easy freeway access into the city more so with Eastlink rumoured to open up early in first half of 2008, as there will be times you will want to get into the city, to watch a major sporting event NRL game, theatre, whatever your cup of tea.

Don't go to prefab suburbs like Berwick and further out, too boring, too much sameness they are like mass non descrip suburbs from America with no capital growth as thats where young couples who can't afford anywhere else are suffering from mortgage stress.

Edited by RON JEREMY

awesome thanks guys :P

Im gonna have to print out a map and mark out all these areas so i know what Im looking at.

I've lived in what is generally considered a "bad" part of sydney my whole life and never had an issue so i guess bad suburbs are all relative to experiences.

Like i said i dont need to be within close distance of melb CBD.

Yes will be looking to move back to sydney within 3-4 years so growth would be nice... thats why i want an el cheapo house in Melb, so my mortgage hovers around 1k/month allowing me to save for an overpriced sydney house.

Im not a fan of new housing developments either, there are plenty here and the value will never go up.

Im heading to VIC at the end of the month to check out prospective living areas :bunny:

If you have more money to spend you could start looking at Frankston, although I haven't heard good things about the suburb.

I'm not sure if the northern suburbs of Melbourne have similar prices to what your looking for...

Frankston gets a really bad wrap. I've worked here for 8 years now (not lived) and the place us really changing. Mark my words Frankson and it's surrounding areas will be worth a mint one day. I'm considering buying an investment property in the area. It's close to the beach, the local council is pouring money into the place and there are many new developments including high rise apartments and a new marina going in. Admittedly there are some bad areas and drugo's around but it's slowly being cleaned up and every area has it's down side.

Frankston gets a really bad wrap. I've worked here for 8 years now (not lived) and the place us really changing. Mark my words Frankson and it's surrounding areas will be worth a mint one day. I'm considering buying an investment property in the area. It's close to the beach, the local council is pouring money into the place and there are many new developments including high rise apartments and a new marina going in. Admittedly there are some bad areas and drugo's around but it's slowly being cleaned up and every area has it's down side.

WOT HE SAID

Frankston is a bit like Richmnond or St Kilda once was, has its seedy druggy side, skanky hookers in skanky brothels. But look what happens on weekends in Richmond and St Kilda, people from all over Melbourne swarm in for the restuarants, cafes etc. I was down by Frankston Pier outside Sophia's on Sunday it was packed and had a great vibe going. Every suburb has its bad pockets in isolated parts but it gives the suburb a real edge. Frankston is definitely on the way up.

I will also be moving to Melbourne in around 6 months and will be buying. I have done quite a bit of research and looking around.

I am looking for a quiet suburb within a reasonable distance to the city that I can buy a 3bd house for between 300~350.

I have come up with a shortlist of Reservoir, Rosanna, Preston around that area. nice quiet area and if you can get a place on the train line you are 20 min from the city. even closer if you drive.

Really keen to get down there and buy a place. I lived in Sydney for 5 years and really liked it even if it is a bit of a SH*^FIGHT.

haha quiet.. Rosanna is quiet.. Preston/Reservoir.. not so much >_< Burnout, commodore, P plater area..

Not good security around there either.

From memory, Preston is in the top 5 or maybe top 10 for most car thefts etc.

In the last 6 months before I moved from Thornbury (right next to Preston), there was 3 cars put up on bricks and their wheels were stolen, and one burnt out car.. on my street alone! This was about 2 years ago, they were pulling down alot of houses and building tiny units in their place.

Epping is alright. Lots of new housing areas are available for building on now. Easy access to the freeway.

House prices will only go up in the next 5 years, especially now they have redeveloped Epping plaza and fixed the bottleneck on the freeway.

It takes maybe 25-30min to Exhibition St via citylink and across top of the city... depending on time of day. Takes longer to drive across the city than it does to go down the freeway!

On Monday I went from Swanston St at 5pm to Thomastown in 15mins via citylink :thumbsup:

also saff_cossie is right about geelong.. if you need to drive to melb every morning.. forget it!

However if you're not driving to the city.. Norlane and Bell Park are nice areas, locals are nice as well.. more of a 'country' attitude compared to city suburbs.

And yes, anything West in Melb is the same as Western suburbs of Sydney.. not recommended...

Bayside is equivalent of the north shore with prices to match :thumbsup:

Werribee smells like the abattoir...

Give you a few areas where not to move to;

Laverton

Sunshine

Cranbourne

Boronia

Footscray

Noble Park

Doveton

Pakenham

Werribee

Frankston

Dude agree with you on some of these, but how about adding a line or two after each suburb enlightening us all as to why you have come to your conclusions.

If you can work from anywhere and you just want a nice bit of land and house for your dogs - then why not consider something further away? Out country, or up in the hills somewhere..... just another idea.

Give you a few areas where not to move to;

Laverton

Sunshine

Cranbourne

Boronia

Footscray

Noble Park

Doveton

Pakenham

Werribee

Frankston

Thats a lot of suburbs, you must move around a lot, if not you are purely going on reputation and the only thing that proves is your ignorance.

I have come up with a shortlist of Reservoir, Rosanna, Preston around that area. nice quiet area and if you can get a place on the train line you are 20 min from the city. even closer if you drive.

unfortunately, these are my hoods.

like Kaz180 said.,

rosanna is nice n quiet. unless you live near the west heidelberg side.. which you don't want to, beleive me!

reservoir is expensive and you don't get alot of dickheads coming out at night. one side is all older and settled in families, the other is a whole lot of italians and so forth.. the community is pretty easy going

preston is f**ked. on average 1 car per day is stolen from Northland, the local shopping centre

expect a whole lot of bogans and commo's. you get the picture.

hope this helps :D

And yes, anything West in Melb is the same as Western suburbs of Sydney.. not recommended...

I live in sydney western suburbs and have never had a problem. Just depends what sort of street you're in, there are some bad ones here and some good ones like mine. I doubt melb's western suburbs are any worse than here.

As for getting out then coming back.. yeah i know. prices will rise here whilst Im gone but Im hoping by buying cheap elsewhere i'll be able to save. And i plan for my income to increase substantially whilst Im living away from everything that distracts me here :D

I was looking at Your Mortgage magazine today and they had an article about some of the cheapest suburbs in Melb (no mention of what they're like though).

This is whats listed:

Melton - median price only 185k! Looked on domain and found some decent looking homes there.

Deer Park

St Albans - whats bad about this place? Seems to get a bad wrap? Is it like Bankstown in Sydney? :D If so i'll give it a miss, otherwise could be ok? :rofl:

Broadmeadows

Cranbourne

Sunshine West

Werribee

Rosebud

Carrum Downs

Rye

Most of the above were showing growth over the past 12 months and all had average annual growth of over 8%.

I've increased my budget to 240k max as well. I'll get a better home for that price and its not a huge difference in repayments from 200k.

I've been looking at Adelaide as well but Melb seems to be the better choice (though i do like Adelaide) as far as return on investment when it comes time to sell.

Edited by -R32GTR-

Out of that list the only ones i would consider would be Rye, Carrum Downs (forgetting the shooting not long back) and Rosebud.

Werribe is a sh*tfarm... literally.

Scumshine takes after its name... and is west

the rest.... not even worth mentioning

Give you a few areas where not to move to;

Laverton

Sunshine

Cranbourne

Boronia

Footscray

Noble Park

Doveton

Pakenham

Werribee

Frankston

Yeah I'd also like to know what your reasoning is there...

Some of those area's will be very big money makes, the problem is everyone thinks short term and want's a palace in Toorak as thier first house, it's just unrealistic.

Boom suburbs I can think of over the next 5-10 years will be -

  • Frankston
  • Croydon
  • Ringwood
  • Footscray
  • Seaford

And where are you from might I ask? Toorak? :D

I'll start with some reasons for you that I can think of -

Laverton - ?

Sunshine - ?

Cranbourne - Too far away

Boronia - ?

Footscray - Drugo's/scum bags (but this area WILL boom, check the property reports and financial figures)

Noble Park - Yeah that's easy

Doveton - Easy too

Pakenham - Too far from anything

Werribee - Long way away and it smells

Frankston - Drugo's/ scum bags (but this area WILL boom, check the property reports and financial figures)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...