Jump to content
SAU Community

Recommended Posts

Hi guys,

I have a question for those that have track experience and know what they are talking about -

Recently I had a track day at wakefield park in my 32 Gts-t and by the end of the day (after pushing the car hard for 60 odd laps) the inside of the front right tyre (i.e. the inside tyre for most corners) had become very worn. I was wondering if anyone could explain this?

The car has stock suspension and when pushed hard into a corner understeered a fair bit (normal I suppose - probably poor driving on my behalf at times :P ) but I have a theory that the tyre could have worn as a result of being dragged across the road during these moments (with very little weight on it obviously). What would be the possible handling upgrades to combat the problem? (I know of SK's handling upgrade package but thats a few $$$ i will need to consider for a while).

Thanks

Link to comment
https://www.sau.com.au/forums/topic/182335-race-track-handling-help/
Share on other sites

very unusual to have more wear on the inside wheel than the outside - when it is understeering its the outside tyre that gets punished.

do you know what the wheel alignment is like on the front, in particular toe?

Still.....60 laps on road tyres is a good day out - they overheat pretty early when pushed and wear very poorly after only a few laps

Thanks Duncan - Yeah, don't have figures on toe at the moment - I have the equipment here to do it just haven't had a chance yet.

I thought the tyres (apart from the unusual wear) held up really well, though a second set of wheels and some race rubber is definately a priority for next time.

Anyone have Ideas what a good time in an (almost) stock 32 Gts-t would be around wakie? I got down to a 1:17.9 hand timed with 2 people in the car.

Btw - I had a look at your car at the SAU Show n shine and it was a very impressive machine - nicely presented too

Edited by Chris-06R

1:17 is pretty respectable in a near stock 32 with street tyres and stock suspension. Actually, i'd say very respectable.

I'm with duncan, i'd have expected your passenger side front outside edge to be toast with the sort of plough understeer nissan engineered into the front end of a 32 :)

lol and I'm with bhdave 1.17 is pretty respectible on street tyres - there is probably only a second or 2 more in it. Maybe time for some good semi slicks they should get you down to 1.12-1.13

Anyone have Ideas what a good time in an (almost) stock 32 Gts-t would be around wakie? I got down to a 1:17.9 hand timed with 2 people in the car.

The best i could get out of my R32 GTSt was 1:13.4. That was with a HKS Cat back exhaust. HKS FMIC, 14psi and Yoko DNA tyres which were 2nd hand from a place in Granville but still better then the Falken 326 i used to run. And i had the Whiteline works package. I think if i had nto modified the car i would have been able to get into the very high 1:12s ... maybe. My first go out in the car as imported with cat back exhaust and AVS 17" wheels and 10psi was 1:18.6 or something. (Std suspension) so you are doing better then i was

Edit...to clarify, when i say modify the car i mean from the road tyres, whiteline suspension and std turbo/ecu etc. I would have maybe been able to improve fromt eh 1:13 to a high 1:12 with more laps. Not do a 1:12 with std suspension etc. No way the little girl could have mustered that sort of pace :P

I dunno about that roy, I'm fairly sure I was close to the cars limit - there might be a second or two from someone who really knows what they are doing but I highly doubt there a 1:13s in my car the way it is...

I'm sure Tyres could definately improve it by more than a couple of seconds, and apart from the FMIC you had my mods are the same, so you've given me something to aim for :)

Still a 1:13.4 is super quick in an almost stock gts-t :P

I dunno about that roy, I'm fairly sure I was close to the cars limit - there might be a second or two from someone who really knows what they are doing but I highly doubt there a 1:13s in my car the way it is...

I'm sure Tyres could definately improve it by more than a couple of seconds, and apart from the FMIC you had my mods are the same, so you've given me something to aim for :)

Still a 1:13.4 is super quick in an almost stock gts-t :P

When i did the 1:13.4 i had the Whiteline works suspension package with a pretty good wheel alighment, cat back exhaust and fmic with 14psi. It also had a clutch, so whilst not heavily modified it has too many mods to be calling it almost stock :D

Prior to the suspension upgrade i was in the 1:18s etc. But i only ever did 2 track days before throwing the suspension in it and then the FMIC. The car stayed in that guise for about 3 years and i got my times down to from the previous 1:18s to the 1:13s.

I often wonder how much quicker i would have been able to go just with more laps with the stock suspension? I dont know, maybe a high 1:16??? I think the car would have been capable of a high 1:12 with road tyres and std turbo etc etc just in learning more. But i got impatient and threw more mods at it...so i will never know :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea my thought was tighter engine when hot is more load a poor ground connection can't take. On that note, I had time to check my driveshaft verical alignment tonight, it's +2 and -2 at either end, so thats perfect and how I had set it up last year. What would be the easiest way to check horizontal alignment between my diff and transmission? I can think of a few ways but they're all complicated and I feel like I'm overthinking it. I'm hoping it's that as I can't see any other reason why I have developed driveline vibration since I put the motor back in. 
    • Thank god. I thought I was the only one, nobody seems to mention this (cause nobody really goes this far in Sedan land). The car's track is 10mm wider at the rear, which explains why the rears sit a little further out for the same size wheels. There's not really many options in widebody land for sedans anyway - People will just use whatever came out of the box and then buy wheels/spacers to suit. To get it perfect you'll likely need custom wheels with custom offsets if you really want to get it perfect which is what I plan to do, but I also plan to utilize more of the inboard space for tyres at the rear... which is also something nobody ever seems to do.... OR my maths have failed me after 20,000 attempts and I'm about to make huge mistakes. 
    • What colour is that?  A mate of mine went red/black on his SLR5000 tribute recently also.  And yes, also glad to see this still progressing albeit slowly. 
    • found a company that makes a flat gauge face 3-d printed mounting base kit to eliminate the dished style gauges. if anyone else is looking to do the same https://www.dashfreaks.de/shop/flat-dials-holder-nissan-skyline-r34-gt-gtt/    
    • I installed my link ecu shortly after. But car ran fine with stock ecu and r35 coils, just had the traction control and slip lights on.
×
×
  • Create New...