Jump to content
SAU Community

Recommended Posts

Hello Everyone,

I'm Selling my R34 GTR that makes nearly 500hp on 18psi.

It's done everything and I have all receipts and logbooks and everything are bought brandnew

and all BRANDED items only...this is a SERIOUS STREET or TRACK car.

This car has only got 21,000 kms and i Bought it GENUINE 8000 kms proven..all stickers and labels on engine bay and all the quality of interior and the smell of the car is freakin brand new smell.

All worked done by Freeflow capalaba on headwork, Mendham engineering bottom end and 101 for tuning and putting it together.

All the head are TOMEI products, 270/280 deg 10.8 lifters, solid buckets, valve springs, titanium retainers,valve guides, shims and 1.2 metal head gasket all are TOMEI.

Bottom End, JE pistons, Eagle Rods, prep and balanced crankshaft, trust extension sump, baffle plate, trust oil pump, n1 water pump and some custom stuff from head oil going back to the sump.

Hks cam gears, timing belt, alloy intercooler pipings, hks twin power,splitfire coilpacks, Greddy 100mm intercooler, oil cooler, everything braided lines and speedflow fittings, hks air filters, oil catch can custom,

ORC lightened flywheel and twin plate clutch

Sard fuel regulator, Hks fuel rail, sard 800cc injectors, twin bosch 044 fuel pumps and surge tank

apexi djetro comp, avcr black, defi gauges, apexi turb timer, nismo 320k dash, carbon fibre shroud,bride red ergo2 seats and rails

Volk te37 18x10.5 with 265 all around.

ITS GOT HEAPS MORE I GOT A PROPER LIST if you want it send me your email address or you can contact me on 04 2203 2203.

Looking at around 80K mark, this car owes me 6 figures. this car will be featured in IGNITION DVD late november or early december.and 7TUNE INTERNET MAGAZINE will do photoshoot this week and make a story about it..THIS IS FULLY JDM look and FREAKING DRIVES SO SMOOTH but very LUMPY hehe...

THIS PICTURES ARE TAKEN LAST MONTH..ive got it POLISHED and clean twice a week NO MORE STICKERS at all FULLY JUST BLACK and yea WORTH A LOOK, im actually going to be really sad letting this go, but more opportunities in life has arrived so it should balance it out.

THANK YOU,

OREO

post-32885-1188268568_thumb.jpg

post-32885-1188268610_thumb.jpg

post-32885-1188268668_thumb.jpg

post-32885-1188268716_thumb.jpg

post-32885-1188268734_thumb.jpg

post-32885-1188268808_thumb.jpg

post-32885-1188268877_thumb.jpg

post-32885-1188268965.jpg

post-32885-1188269273_thumb.jpg

post-32885-1188269420_thumb.jpg

post-32885-1188269572_thumb.jpg

Edited by DATS IT
Link to comment
https://www.sau.com.au/forums/topic/182621-2000-r34-gtr-blackvery-cheap500hp/
Share on other sites

  • 2 weeks later...

Can vouch for the genuine Km's and brand new condition of the car. The factory smell is still in the car.

We sold it to him :)

A good thing that you've changed it to!

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...