Jump to content
SAU Community

Dr-30 Rs Turbo Stickers For Side

benny_blanco
 Share

Recommended Posts

benny_blanco Proficient

benny_blanco

Posted
Posted

Im trying to get hold of some RS-Turbo stickers for the side of my DR30.

So far I found some on the Jenesis webstie www.r30.co.jp but cos i cant understand Japanese I havnt had any luck ordering any. I tried emailing them a couple of months back but never got a reply.

can anyone help me out?? Is there any site in English preferably Australia / South Australia.

I have allready tried JMS, Jaustech, Adelaide Jap imports to no avail.

also does anyone have the paint code for the bottom 1/2 of the car, mine was painted black in the respray, I hear its really ment to be a real dark metalic blue.

cheers

-Glenn

Link to comment
https://www.sau.com.au/forums/topic/183007-dr-30-rs-turbo-stickers-for-side/
Share on other sites
Ghostrider Grand Master

Ghostrider

Posted
Posted

Make your own. Any sign maker can do this. Take a picture of the signs you want or a scan from what you have from Jenesis and get them to make it.

As for colour coding if your car is red, it's 013. If it's 2 tone the only factory reds were 059, made up with 013 Red over 028 Grey and otherwise 013 Red over 826 Black, according to my JDM Brochures.

Do you have a colour code on the compliance/manufacturing plates?

0R10N Explorer

0R10N

Posted
Posted

I took some high-res photos of my decals for ChokudoriDR30 last year, if you decide to go the signmaker route I'll see if I can dig them up for you.

Jenesis are rather iffy about sending stuff overseas. Not sure if it's the language barrier or what.

benny_blanco Proficient

benny_blanco

Posted
  • Author
Posted
Make your own. Any sign maker can do this. Take a picture of the signs you want or a scan from what you have from Jenesis and get them to make it.

As for colour coding if your car is red, it's 013. If it's 2 tone the only factory reds were 059, made up with 013 Red over 028 Grey and otherwise 013 Red over 826 Black, according to my JDM Brochures.

Do you have a colour code on the compliance/manufacturing plates?

Its White over black atm.... Car came all white from the Factory so doubt it would have any colour codes on the plates. heard from a few people it should be a real dark metalic blue for the white ones not black? so thats what I came to beleive.

I took some high-res photos of my decals for ChokudoriDR30 last year, if you decide to go the signmaker route I'll see if I can dig them up for you.

Jenesis are rather iffy about sending stuff overseas. Not sure if it's the language barrier or what.

looks like I might have to go that option. if you can find them it would be sweet.

benny_blanco Proficient

benny_blanco

Posted
  • Author
Posted
PM me if you're set on getting the Jenisis ones I know a dood who can prob hook you up.

And yes my Iron mask coupe was metallic blue on the bottom 1/2... maybe an affect of fading with age, but it def wasn't black.

Will see how it goes, If its gonna be abit of a headf**k with Genesis I guess I would only be looking @ them there If i decide on buying the 260kph gauge aswell. bonus is it would go from 85,000kms to 0kms ;)

meter.gif

0R10N Explorer

0R10N

Posted
Posted

Found them. Enjoy

http://www.tx3nz.com/img/dr30/decal-001.jpg

http://www.tx3nz.com/img/dr30/decal-002.jpg

http://www.tx3nz.com/img/dr30/decal-003.jpg

(about 1.5MB each, unresized from 3264 x 2448)

Boof Mentor

Boof

Posted
Posted
Im trying to get hold of some RS-Turbo stickers for the side of my DR30.

So far I found some on the Jenesis webstie www.r30.co.jp but cos i cant understand Japanese I havnt had any luck ordering any. I tried emailing them a couple of months back but never got a reply.

can anyone help me out?? Is there any site in English preferably Australia / South Australia.

I have allready tried JMS, Jaustech, Adelaide Jap imports to no avail.

also does anyone have the paint code for the bottom 1/2 of the car, mine was painted black in the respray, I hear its really ment to be a real dark metalic blue.

cheers

-Glenn

Glenn..

Your right, the car was all white to start with, Crimmo had it sprayed white or black

The black isnt black, its black with a blue pearl through it! I could probably get my paint codes from mine as mine was white over black from factory!

Have you tried Datsport?? I enquired about some down there before and they said they could probably get them, worth a try!

benny_blanco Proficient

benny_blanco

Posted
  • Author
Posted

Nah I havnt, a guy I spoke to with a couple of DR30's awhile back said he tried that option but no luck.

Ended up going through an SAU board member Taran....... Apex Graphics - http://www.apexgfx.com

im just eagarly awaiting them now :blink:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      Kelford 246-A2. 262in/272ex. 
    • Adam_ECR33
      Hello sau 👋

      By Adam_ECR33 · Posted

      Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • JC71
      98 R34GTT 4k engine stumble

      By JC71 · Posted

      98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • r32-25t
      Why am I hitting a power wall with my stroked RB25?

      By r32-25t · Posted

      When you say your cams are 272/262 is that 272in and 262ex?
    • Kinkstaah
      Nismo GT Pro LSD configurations

      By Kinkstaah · Posted

      We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...