Got My Car Tuned

[tom9999]

Hhi guys,

Just wondering what you think of the graph/ results??

Mods are:-

Power FC

FMIC

JJR Split Dump & Front Pipe with split wastegate pipe [ still standard cat and cat back exhaust]

Power intake filter

Heavy duty clutch

i made 212.3 RWKW

[DjeMz]

that dyno sheet is pretty cool

never seen one like that before!

[Simon-S14]

that said, its not a very smooth curve for a stock turbo either...

what boost?

[WARLORD]

thats a high ramp rate 126 kph should t it be around 9-11 kph

Edited August 31, 2007 by WARLORD

[tom9999]

its a 12psi with a jdm manual boost controller.

how do you get a better power curve. whats the ramp rate

[siddr20]

Maybe change plugs and regap them? if not done already..

But nice power..

[tom9999]

^^ thanks. i put brand new platium plugs in gapped at 0.8 and took the old ones in to help them with the tune.

[NYTSKY]

Anything over 200rwkw with those mods and 12psi is amazing.

But all dynos are different.

[tom9999]

yeah i was quite happy about it. ive just put in some splitfire coilpacks and i will finish the exhaust soon. Does the standard AFm max out at 220 RWKW ???????

[abu]

Pretty good for stock turbo, stock cat and cat back exhaust.

Should upgrade the exhaust to a high flow cat and 3" cat back and see if you pickup any power. With better flow from the exhaust would the power curve improve at all?

Nice work though, you must be heaps happy with it!

[tom9999]

yeah i'm goin to get a JJR cat back and a X-force high cat then it should be good. with a high flow exhaust hopefully i should get a better power curve anyone confirm??

[abu]

yeah i'm goin to get a JJR cat back and a X-force high cat then it should be good. with a high flow exhaust hopefully i should get a better power curve anyone confirm??

Yep that should be good.

I'm also keen to know if it would improve the curve? Guess it would as it would have a greater flow over standard, helps the engine to breathe better!

If anything should be a bit more responsive and might pick up a bit of mid-range or something?

[tom9999]

i ran a 13.7 with 92 knock level wasnt too happy.

[abu]

yeah i was quite happy about it. ive just put in some splitfire coilpacks and i will finish the exhaust soon. Does the standard AFm max out at 220 RWKW ???????

Should go a bit more than that. Seen people going to up and a little beyond 250rwkw on standard RB25 AFM.

Interested to know what they do max out at though?

i ran a 13.7 with 92 knock level wasnt too happy.

Yep, wouldn't be too happy would it..

Edited September 1, 2007 by abu