Jump to content
SAU Community

Recommended Posts

Old topic.

Well like it sayd on the thread Will the GTRs exhausts fit onto Rs4s and 260Rs? And exhaust from Rs4s are interchangeble with 260Rs?

I know in terms of length wise the Gtrs exhaust will fall shorter in comparison to the Rs4s and 260Rs specs. Cos i noticed in my Nismo exhaust from the end of the main body of the muffler to the tip of the outlet exhaust its like almost a foot long. Probably its just a GTrs echaust with an extended tip to fit onto the 260Rs.

Main thing is are the hannging points where the exhaust are hooked onto the undercarriage vis a rubber thingy are all at the same points? With the Gtrs, Rs4s and 260Rs? If they are almost the same then it shouldnt be a big problem to modify it abit. And how about the layout the bends of the exhaust ETC all the same?

Link to comment
https://www.sau.com.au/forums/topic/183304-gtrs-exhaust/
Share on other sites

Old topic.

Well like it sayd on the thread Will the GTRs exhausts fit onto Rs4s and 260Rs? And exhaust from Rs4s are interchangeble with 260Rs?

I know in terms of length wise the Gtrs exhaust will fall shorter in comparison to the Rs4s and 260Rs specs. Cos i noticed in my Nismo exhaust from the end of the main body of the muffler to the tip of the outlet exhaust its like almost a foot long. Probably its just a GTrs echaust with an extended tip to fit onto the 260Rs.

Main thing is are the hanging points where the exhaust are hooked onto the undercarriage vis a rubber thingy are all at the same points? With the Gtrs, Rs4s and 260Rs? If they are almost the same then it shouldnt be a big problem to modify it abit. And how about the layout the bends of the exhaust ETC all the same?

Hey I tried a r32 exhaust on my rs4 as thought i would be able to lengthen it as some other forum members have done. Problem I had was that the offsets for the rear muffler on the r32 were centre to centre, where as the stagea really needs right-right. I couldn't get it to fit in, and the pipe bends weren't quite right either.

I have a Trust Power Extreme system specifically for the stagea that I am looking to sell as it hangs a bit too low at the rear can for my stupid-steep driveway. PM me if you are interested ... looking for $750 but need to sort a replacement system first. Its only been on the car 2 weeks.

Link to comment
https://www.sau.com.au/forums/topic/183304-gtrs-exhaust/#findComment-3322528
Share on other sites

Are the echaust for 32s, 33s and 34 GTRs the same meaning are they interchangable? Are the Rs4s and 260rs exhaust interchangeable?

I can confirm that the dump and front from R33GTR can be used on 260rs no problems. But cat back i dont know. Any ideas?

What im trying to do is try to use an echaust from R33 or R34s why? Cos theres not much to choose from a 260rs for the exhaust system. Im trying to look for a 3.5" at least. So....

Link to comment
https://www.sau.com.au/forums/topic/183304-gtrs-exhaust/#findComment-3322893
Share on other sites

I have tried to fit ( well lined up ) a skyline rear box on a Std RS Four. The petrol tanks appear to be in a different position.

There was no way it would fit .

Skyline GTS exhausts dont fit GTRs so I would assume that RS Fours AND 260RS exhausts are different. Possibly the back box may be the same shape but could be a different pipe size

Edited by RSVFOURUK
Link to comment
https://www.sau.com.au/forums/topic/183304-gtrs-exhaust/#findComment-3323993
Share on other sites

I have tried to fit ( well lined up ) a skyline rear box on a Std RS Four. The petrol tanks appear to be in a different position.

There was no way it would fit .

Skyline GTS exhausts dont fit GTRs so I would assume that RS Fours AND 260RS exhausts are different. Possibly the back box may be the same shape but could be a different pipe size

did you sue a Gts box or a gtr box? Im tryin to use a GTR echaust on a 260rs though

Link to comment
https://www.sau.com.au/forums/topic/183304-gtrs-exhaust/#findComment-3324302
Share on other sites

Hey I tried a r32 exhaust on my rs4 as thought i would be able to lengthen it as some other forum members have done. Problem I had was that the offsets for the rear muffler on the r32 were centre to centre, where as the stagea really needs right-right. I couldn't get it to fit in, and the pipe bends weren't quite right either.

I have a Trust Power Extreme system specifically for the stagea that I am looking to sell as it hangs a bit too low at the rear can for my stupid-steep driveway. PM me if you are interested ... looking for $750 but need to sort a replacement system first. Its only been on the car 2 weeks.

you know you can fix your steep driveway easy. Go to the junk yard and buy your self a tick steelplate and put it over the ditch so the angle becomes not so steep. of course you have to drive a few bolts on the pave way to hold it in place. Seen it in a few service station and coles did it.

Yea ken im looking into buying one from japan.

A friend of mine told me that Rs4s and 260rs are interchangeable. And 260rs can use a Gtrs echaust but have to cut and weld though. I think i will just have to do that

Link to comment
https://www.sau.com.au/forums/topic/183304-gtrs-exhaust/#findComment-3327856
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...