Jump to content
SAU Community

Recommended Posts

OK before you perthies start tellin me to go to my own section :)

I wanna get perth numberplates cos they're l33t and long.

Also since I'm planning on doing a widebody conversion for the R32 I'm bringing down, I wanna get Phat Ass or sumfin similar to that.

What's the rules for gettin the plate, do you have to do a yearly renewal, does the car have to have a WA rego, any rules for rego, do you have to do yearly inspections?

Please advice and no whoring.

oh and no starwars porn...

Link to comment
https://www.sau.com.au/forums/topic/18338-wa-numberplates/
Share on other sites

btw you know if you guys get 20 ppl together you can get WA numberplates with a "sporting club" logo on it. All you gotta do is have an Association number or ABN. I reckon you guys should get SAU WA numberplates, that'd be uber cool.

Link to comment
https://www.sau.com.au/forums/topic/18338-wa-numberplates/#findComment-383520
Share on other sites

yeah but the sporting club ones are the type of plates the WA governement intends to lease to u so u pay every year to have the plate.

what do u mean no :) porn thats the best bit.

anyways all u need to do is apply for the plates and have them sent to ur nearest licensing centre. seeing your in wa i don't know how it would work.

you don't have to put them on a car staight away but you have to put them on a registered car. they hold them at the licensing centre while ur waiting for a car to put them on

Link to comment
https://www.sau.com.au/forums/topic/18338-wa-numberplates/#findComment-383831
Share on other sites

do I need a WA registered car? If I do, is it possible to register the car once and then jus mail in the registration renewal. like in VIC?

If I don't need a WA rego'd car, then I'mma gettin myself a numberplate asap.

Link to comment
https://www.sau.com.au/forums/topic/18338-wa-numberplates/#findComment-383882
Share on other sites

It goes like this (i used to be an licensing clerk) u wont be able to keep them for long if your car is in another state - i think its 3 months and then it has to have the plates handed in and the car licensed in whatever state your in and licensed with those plates.

Sorry.

Link to comment
https://www.sau.com.au/forums/topic/18338-wa-numberplates/#findComment-384314
Share on other sites

yes they can hold plates for 3 years - but one of the guys in the eastern states wants WA plates on his car - The car must be licensed with a WA address and can have an Eastern States postal address - but yes the car has to be present in the state of license. If he was to take his car back to the east with WA plates on it then he could keep them for 3 months then they would have to be handed in and the car pitted and licensed in his own state ;)

Link to comment
https://www.sau.com.au/forums/topic/18338-wa-numberplates/#findComment-385379
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I may have my math slightly wrong, I'm not double checking that again, but the factory spec for fuel pressure is to set it with the engine IDLING (in vacuum). That spec is 51PSi while idling. So now add +10psi for atmospheric, and +7 for 7psi of boost, and we need 68psi of fuel pressure at full noise, and 51psi idling. That's according to the FSM I found last night for M35. So MINIMUM fuel pressure should be 51psi and it climbs from there.
    • Provided that what you see makes sense and is not "linear" between, say 1.9 and 2.1 volts and that's the whole range you get. You still need it to be doing one end of the 0-5v range at one end of travel, and the other end of the 0-5v range at WOT.
    • So just calibrate whatever voltage the closed position and full throttle position is and check linearity ? Sounds good to me 
    • go look at the live data, and slowly open and close the throttle, if it is moving in a linear fashion, just do a re-calibration. OR if you really want to, adjust the TPS position so it's under 1V (no need to be bang on a 0,45V, it's not a stock ECU), then recal. Job done, rip skids, post it here.
    • Looks better than dusted paint, and also looks better than the old OEM one, much happy  
×
×
  • Create New...