Jump to content
SAU Community

Recommended Posts

Sorry guys, i am having too much fun driving it. Its on a basic low boost run in tune at the moment. 330 rwhp at 6900 and .8 bar of boost. Its a ton of fun to drive. Still so much left in it its just ridiculous, The power curve hasnt even bugun to taper and thats with no timing and a rich tune.

I told mick I wanted 400 rwkw at 25 lb of boost. "you wont need that much boost on this engine to get that figure" was his response. !!WOOOOOOOOT!! :D:D

I think i may reevaluate my street boost too. I was going to run it around 18 lb but after seeing how willing it is to make the numbers i will probably settle for about 1 bar.

Off to drive it again. Cyall. :):):)

OH! the redline will be 85000 rpm on full tune.

  • Replies 187
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Sorry guys, i am having too much fun driving it. Its on a basic low boost run in tune at the moment. 330 rwhp at 6900 and .8 bar of boost. Its a ton of fun to drive. Still so much left in it its just ridiculous, The power curve hasnt even bugun to taper and thats with no timing and a rich tune.

I told mick I wanted 400 rwkw at 25 lb of boost. "you wont need that much boost on this engine to get that figure" was his response. !!WOOOOOOOOT!! :D:D

I think i may reevaluate my street boost too. I was going to run it around 18 lb but after seeing how willing it is to make the numbers i will probably settle for about 1 bar.

Off to drive it again. Cyall. :):):)

OH! the redline will be 85000 rpm on full tune.

what power did mick reckon ull hit up on 1bar then..?

good to see noel.. and redline 85000rpm?

OH! the redline will be 85000 rpm on full tune.

Welcome to the 8000 + RPM club :)

IT has a really nice Midrange Noel! with Roughly the same response as my car with a turbo several sizes bigger! Should be good, just get those brakes working properly! :)

Nice work mate. Well done. Have you done anything with the cam gears?? Mine are still set on 0 but want the change them to get some more midrange.

My 25 made 399rwkw on 17psi reving to 8k. Will be rutuned in a few weeks for 22-25psi and 8500 rev limit. Thats if it holds together :)

jetcar_w.jpg

Not sure if these do 85000rpm but im sure they spin pretty fast...

So how long for the run in, til you go supersonic i mean?

Your not the only one who has put the lines to the wastegate backwards before also :)

Nice work mate. Well done. Have you done anything with the cam gears?? Mine are still set on 0 but want the change them to get some more midrange.

My 25 made 399rwkw on 17psi reving to 8k. Will be rutuned in a few weeks for 22-25psi and 8500 rev limit. Thats if it holds together :)

thats sweet mate. The cam gears are untouched at this stage, Not going there till the power tune.

Let me know how your hi boost tune goes, it sounds very similar to my setup. 399 at only 17 lb is awesome. Good luck with it.

My engine setup

Am using 1000cc injectors, splitfire coils, custom fuel rail with twin entry, 1 walbro intank pump feeding surge tank then 2 044s to fuel rail, Tomei cams, 85mm throttlebody, Greddy plenum (badge not on in pic) twin T3/T4 turbos, 48mm external gate, Haltech E11v2 and the list goes on and on...

Engine.jpg

Edited by WHITER33GTS-T

Hey noel! looks n sounds sweet brother, mine unfortuantly has not even begun its transformation. i calling the mechanic today, you've inspired me!

Look at ur face, it says it all congratulations noel, i will hope to see you down the bank when i get finished..

Hame

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So yes. All of them. Something like 98% of all fuel in the USA has 10% ethanol: https://afdc.energy.gov/fuels/ethanol-fuel-basics It's labelled as like, AKI, 87, 91, 93 with an E10 or E5 or E15 label on the pump. At a certain point, it's not just "E10" instead of 91. It is 91, 95, 98, and all of them have 10% Ethanol in them. You can also get E85 and E30 which is why you do see some people rolling around with E30 tunes in them.
    • Thanks for the response. This is an 04 EP3 Type R. JDM spec. Fairly certain they're just basic BC racing coils. I do plan to keep as the ride quality on stock I've been told is pretty meh given Sydney roads. If I were to go down that avenue, does NSW require them to be a certain spec (close to original) etc?
    • Should have asked what is the car?
    • I've had two super conflicting experiences with blue slips. My 30 year old E39 waltzed through with no issues but my brother in law was knocked back on 12 y/o 3 series due to wiper blades and some cracking in a control arm bush.  What kind of coil overs? Do you want to keep them after?  If it was me I'd get some dirt cheap shocks and springs from eBay or scumtree. Not ideal but will get you over the line and might even be less than $1k.
    • Hey guys,  Way back when (about 15yrs plus), I picked up a beautiful set of Tein 'Super Racing Spec Circuit Master RE' coilovers from Russman. I have legit never fitted them to my car, as it was garaged indefinitely while i bought a house Yada Yada. They look brand new! Anyway its time to pick up where I left off, and have started doing some khanacross and am booked in for a hill climb next month. The car has some hard af Nismo shocks in ATM, which has me wanting to upgrade again, and now I am left wondering if it's worth having these teins rebuilt? I think they where an ok shock back then, but how do they compare to what's on the market now?  Shockworks/mca are 2800+, and I am sure they are great. But if I can have these rebuilt and be better than, say, a set of bc's for around the cost of bc's, I would be happy with the performance v cost trade off.  If they are considered outdated and rubbish these days, so be it, I'll put them on the shelf and be happy to look at the pretty green colour while I save for the SW/MCA option. Grateful for your thoughts on the matter, and suggestions on who could do the rebuild if it's a worthwhile pursuit.  cheers, Rowdy. 
×
×
  • Create New...