Jump to content
SAU Community

Recommended Posts

hey guys,

Using the basic TIEN (height only adjustable) coilovers with pillow ball tops in them, Its been brought to my attention by a few people lately that they are noisy as hell. Everytime i go over a bump they make noisy clunking noises. It seems to be getting louder and louder...They are still very stiff, they aren't showing much sign of wear except for this...or is this normal for pillow ball tops?

thanks guys

Link to comment
https://www.sau.com.au/forums/topic/184453-noisy-coilovers/
Share on other sites

Ive got TEIN Coilovers and they are silent, but mine are the ones that are re-designed by Fulcrum to better suit Aus roads.

Are yours imported?

If they are they're probably not very well suited to Australian roads and they will be extremely stiff, a friend of mine put Jap spec TEIN's in his R33 and it was so stiff that you needed a kidney belt to ride in it and they were also very clunky, it sounded as if they were loose but we checked every bolt and they were all fine, I think it has something to do with the internals of the shock- when they get older they start to get very noisey, so he took them out.

However Ive had mine for about 12 months now and they are as quiet as they were when they were new.

Link to comment
https://www.sau.com.au/forums/topic/184453-noisy-coilovers/#findComment-3341041
Share on other sites

I got Teins Super Streets and mine only make a clunk noise if i hit a bump which i would expect lol - But my rear left hand side one does squeek but haven't had time to remove back seat to check it isn't anything in there but apart from that silent.

Link to comment
https://www.sau.com.au/forums/topic/184453-noisy-coilovers/#findComment-3341785
Share on other sites

I've got tein ha coilovers (Jap spec) at the moment and the rear ones clunk, especially at low speeds. They still work fine, but am sure somethings loose inside or worn out.

I like the way they ride, so going to Aus spec one's will be softer and I'll need to get some whiteline swaybars to reduce the bodyroll I'm gonna get!

Link to comment
https://www.sau.com.au/forums/topic/184453-noisy-coilovers/#findComment-3341820
Share on other sites

Unfortunately, that's just the way Tein HR's (HR's are high springrate coilovers just like HA's, but without all the adjustability) end up after a while. Most are fairly old now and just about every car I've been in that's had them rattled like crazy. I say time for an upgrade! :)

Edited by AZN25T
Link to comment
https://www.sau.com.au/forums/topic/184453-noisy-coilovers/#findComment-3345191
Share on other sites

yea its kinda rattley... i just had a look and it says HR on them.....what sort are these...everything is tight...didnt check the top of the strut towers tho....they didn't move at all with a bit of persuasion

hr's are as stiff as sh*t and ha's i have a half set of each sitting in the shed for that reason,go and grab some of the aus spec ones handles and rides like a completely different car.also when i pulled my hr coilovers out and pulled them apart they had next to no oil left in them!

Link to comment
https://www.sau.com.au/forums/topic/184453-noisy-coilovers/#findComment-3345785
Share on other sites

My experience with Tein suspension has been a nightmare. :kiss:. They are the stiff-est i've came across. Have since changed them to HKS suspension.

Those with jap spec teins might want to send them to Fulcrum to get them reconditioned when they start to make noises. Fulcrum will probably rebuild them to be more suitable for australian roads.

Link to comment
https://www.sau.com.au/forums/topic/184453-noisy-coilovers/#findComment-3345882
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...