Jump to content
SAU Community

Upgraded Fuel Rail

paul f

By paul f,
in Engines & Forced Induction

 Share

Recommended Posts

paul f Enthusiast

paul f

Posted
Posted

ok i just got an upgraded fuel rail for my rb26dett but the problem is the holes on the rail were the injector sits in are too big! do i have to get new injectors that fit? i thought all top feeds are the same diameter(well ones for the rb26 atleast) is there away i can make them work? im so lost! help

Link to comment
https://www.sau.com.au/forums/topic/184734-upgraded-fuel-rail/
Share on other sites
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Why did you buy a fuel rail?

The stock one if fine for over 400rwkw, and going by all your others threads your trying to do things all as cheap as possible... so this parts makes less sense than some of the others!

Beer Baron Grand Master

Beer Baron

Posted
Posted

this may seem like an obvious question but what size and brand fuel rail did you buy? and what injectors are you trying to put in there?

standard RB26 injectors are 10.5mm.

paul f Enthusiast

paul f

Posted
  • Author
Posted

i really dont know what kind of fuel rail! sorry its just like a generic type! its got 6-an fittings on both side and middle! im using stock rb26dett injectors but they are loose as hell in the hole in the rail! can i just use a bigger o-ring to make it fit? ill try to find it ill post a pic/link

Beer Baron Grand Master

Beer Baron

Posted
Posted

unfortunately that is the problem you get with cheaper generic brand stuff. often they have poor fit and finish and are just generally not always 100% suitable. as for larger 0-rings you may be able to. try some and see if you can get some with the right ID and OD to make it work. but personally I'd just bin the rail and either buy a proper fitting one, or just use the stockie.

R31Nismoid Grand Master

R31Nismoid

Posted
Posted
r31-thanks for the nice comments! no need for that! its my car/motor and ill do what i want!

So you either are or are not short of a coin.

Either way the ebay add says 2JZ... i mean, that isnt RB26 now is it?

Sell it, use the stock one.

silver gts-t Grand Master

silver gts-t

Posted
Posted
So you either are or are not short of a coin.

Either way the ebay add says 2JZ... i mean, that isnt RB26 now is it?

Sell it, use the stock one.

It rude to question someone as to if they're low on cash, its none of your concern. You posted in most of his threads just questioning his intentions instead of providing any help at all.

He said the its the same rail but for a rb26, maybe the supplier simply sent out the wrong part.

No need to post useless comments that people dont want to read, learn to be constructive.

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

In his threads he has been stating he is trying to go all the cheap options.

Buying a un-proven fuel rail does not fit into this and is risky, and as it turns out... look what happened.

Might pay you to go back over past threads, as it seems you missed the majority.

silver gts-t Grand Master

silver gts-t

Posted
Posted
In his threads he has been stating he is trying to go all the cheap options.

Buying a un-proven fuel rail does not fit into this and is risky, and as it turns out... look what happened.

Might pay you to go back over past threads, as it seems you missed the majority.

dude, your missing the point...

your not helping anyone. anyway its not the first time someone has mentioned something about your attitude in people's thread, you didnt get the point then and you wont get it now.

let the thread continue.

BAMR33 Mentor

BAMR33

Posted
Posted
dude, your missing the point...

your not helping anyone. anyway its not the first time someone has mentioned something about your attitude in people's thread, you didnt get the point then and you wont get it now.

let the thread continue.

Might help the poor guy develop some common sense.

paul f Enthusiast

paul f

Posted
  • Author
Posted

ok the link i posted i was the fuel rail looks like!!! i didnt order that one/ or order it from the seller! it came from a company called bmpc here in america! it came in a box marked for an r32/33/34 so yes its for an rb26dett! i just want to know it there away to make stock injectors work! no need to bash my shallow pockets! i got the part of dirt cheap! just looking for help not bashing!

and another note r31 i will beusing a greddy emanage to run my car so is that good enough for your standards? or am i still to cheap?

GeeTR Grand Master

GeeTR

Posted
Posted

If you got it for "Dirt cheap" then no real loss, just sell it on. Just use the stock rail (you wont like the cost of AN fittings to get it running anyway)

I would recommend really researching parts you need to make the power you want. The RB26 Dyno Thread is more then a page of braggin rights. You can browse many setups and get an very good idea of what parts people are using to make what power.

The search box will save you $$$ and ridicule.

Happy tuning :closedeyes:

shanef Grand Master

shanef

Posted
Posted

if u do use the billet rail, u'll find u will end up spending 3x the cost of the rail itself, on braided lines & fittings

also if u do use the billet rail, u'll now need an aftermarket fuel reg.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      spot the stagea

      By Duncan · Posted

      roof rail delete used to be a thing, they were made locally for a while too
    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • AnimalGarage
      Can you mount the ATTESA pump in other locations?

      By AnimalGarage · Posted

      According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • GTSBoy
      R34 25GT Engine Light 21

      By GTSBoy · Posted

      If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...