Jump to content
SAU Community

Recommended Posts

ok i just got an upgraded fuel rail for my rb26dett but the problem is the holes on the rail were the injector sits in are too big! do i have to get new injectors that fit? i thought all top feeds are the same diameter(well ones for the rb26 atleast) is there away i can make them work? im so lost! help

Link to comment
https://www.sau.com.au/forums/topic/184734-upgraded-fuel-rail/
Share on other sites

Why did you buy a fuel rail?

The stock one if fine for over 400rwkw, and going by all your others threads your trying to do things all as cheap as possible... so this parts makes less sense than some of the others!

this may seem like an obvious question but what size and brand fuel rail did you buy? and what injectors are you trying to put in there?

standard RB26 injectors are 10.5mm.

i really dont know what kind of fuel rail! sorry its just like a generic type! its got 6-an fittings on both side and middle! im using stock rb26dett injectors but they are loose as hell in the hole in the rail! can i just use a bigger o-ring to make it fit? ill try to find it ill post a pic/link

unfortunately that is the problem you get with cheaper generic brand stuff. often they have poor fit and finish and are just generally not always 100% suitable. as for larger 0-rings you may be able to. try some and see if you can get some with the right ID and OD to make it work. but personally I'd just bin the rail and either buy a proper fitting one, or just use the stockie.

r31-thanks for the nice comments! no need for that! its my car/motor and ill do what i want!

So you either are or are not short of a coin.

Either way the ebay add says 2JZ... i mean, that isnt RB26 now is it?

Sell it, use the stock one.

So you either are or are not short of a coin.

Either way the ebay add says 2JZ... i mean, that isnt RB26 now is it?

Sell it, use the stock one.

It rude to question someone as to if they're low on cash, its none of your concern. You posted in most of his threads just questioning his intentions instead of providing any help at all.

He said the its the same rail but for a rb26, maybe the supplier simply sent out the wrong part.

No need to post useless comments that people dont want to read, learn to be constructive.

In his threads he has been stating he is trying to go all the cheap options.

Buying a un-proven fuel rail does not fit into this and is risky, and as it turns out... look what happened.

Might pay you to go back over past threads, as it seems you missed the majority.

In his threads he has been stating he is trying to go all the cheap options.

Buying a un-proven fuel rail does not fit into this and is risky, and as it turns out... look what happened.

Might pay you to go back over past threads, as it seems you missed the majority.

dude, your missing the point...

your not helping anyone. anyway its not the first time someone has mentioned something about your attitude in people's thread, you didnt get the point then and you wont get it now.

let the thread continue.

dude, your missing the point...

your not helping anyone. anyway its not the first time someone has mentioned something about your attitude in people's thread, you didnt get the point then and you wont get it now.

let the thread continue.

Might help the poor guy develop some common sense.

ok the link i posted i was the fuel rail looks like!!! i didnt order that one/ or order it from the seller! it came from a company called bmpc here in america! it came in a box marked for an r32/33/34 so yes its for an rb26dett! i just want to know it there away to make stock injectors work! no need to bash my shallow pockets! i got the part of dirt cheap! just looking for help not bashing!

and another note r31 i will beusing a greddy emanage to run my car so is that good enough for your standards? or am i still to cheap?

If you got it for "Dirt cheap" then no real loss, just sell it on. Just use the stock rail (you wont like the cost of AN fittings to get it running anyway)

I would recommend really researching parts you need to make the power you want. The RB26 Dyno Thread is more then a page of braggin rights. You can browse many setups and get an very good idea of what parts people are using to make what power.

The search box will save you $$$ and ridicule.

Happy tuning :closedeyes:

if u do use the billet rail, u'll find u will end up spending 3x the cost of the rail itself, on braided lines & fittings

also if u do use the billet rail, u'll now need an aftermarket fuel reg.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...