Jump to content
SAU Community

Recommended Posts

Hey guys.

A few mates and myself are having a day out on the track in a few weeks time down at Wakefield. I, myself have a R33 GTR that has been tuned on Shell's V power racing. I had a look on shells website last night and noticed that the Goulburn servo doesnt sell it.

For those who's cars have been tuned on this fuel and have been to a track day how did you get around not having enough fuel for the day?

I dont want to have jerry cans in the car on the way down.

Link to comment
https://www.sau.com.au/forums/topic/184891-wakefield-park-and-fuel/
Share on other sites

Well if you're not taking jerry cans, then you're going to have to go back to goulburn to get fuel at some point. Get 98RON in Goulburn and dump some of the Pro Strength Nulon octane booster in it (i know for a fact you can get the pro strength from the BP at Marulan 25k's out of Goulburn, cos I bought it there last week :P)

Octane booster might not get it up to the level of VPRacing, but you've got no other choice unless you take some cans :unsure:

You're welcome.

Yeah it kinda sucks that you can only get 100ron at a select few places - I've warned a couple of mates off getting their cars tuned on it simply for that reason!

Good luck with your track day mate!

Bah.

This is rediculous!. In the whole of NSW Shell only sells racing at 8 servo's!

Im not too keen on running 98 with the "boosters" on a built motor.

Cheers for the quick reply

yes only 8 servos....which is why you shouldn't get your car tuned with these fuel unless you live close to these servos.

^^^

On the PFC the knock with 1.6 BAR (GT - RS's), 9.0:1 comp is about 15.

What the hell is wrong with Shell? I just sent them an email about having it only available at so few places within the state. Proberbly falling on deaf ears!!!!.

You've gotta remember that the cost of integrating the infrastructure for a completely new type of fuel would be fairly costly. They probably dont see the demand as high enough to roll it out australia wide until they can confirm that theres enough petrol heads out there to warrant it. Give it time.

Buy some jerry cans and run them. You're only going to get 98RON in Goulburn.

I find it funny / stupid that Shell won't supply 100RON so close to the track. The Shell out front of Eastern Creek doesn't stock V-Power Racing either....and being on a main transport hub (M7 / M4 intersection), and so close to the track, you'd think they would.

Just not ha-ha funny.

Edited by scathing

ET Racing fuel is now available from the Wakefield Park bowser.

http://www.wakefieldpark.com.au/

Give them a call to confirm 'which' ET racing fuel they are selling, but I think its 102 octane. From memory it was over $2L

I live right near a Shell that sells the racing and it's out of stock about 80% of the time anyway. Also since they use ethanol to up the octane and it has much lower taxes it should actually be cheaper than the 98 but it's not so they are ripping us off. Another thing to note is that the petrol stations buy vpower at 4 c/L more than 91 octane and yet they sell it for 10 c/L more.

Also, what everyone else said about them not selling it near places that would have high use. I just don't get what they're playing at.

All that said, my last couple of track days I filled two Jerry cans and took them with me. Did the job.

buy 2 20L jerry cans and fill up before you leave. depending on where you are travelling from you may need to buy 3 unless you don't mind chugging home on 98. You really have no option. I tend to go through about 100L on a trip from campbelltown to wakefield and back with 7-8 sessions on the track

There's a Shell near me that sells V-Power Racing, so I'll normally try and empty my tank by the night before a track day, and then fill up (and fill some jerry cans) before I head down.

I'll normally need about 2 tanks of fuel for a regular Wakefield track day (from home back to home), so usually I'll just fill up with 98RON at lunch time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...