Jump to content
SAU Community

Recommended Posts

Hey guys.

A few mates and myself are having a day out on the track in a few weeks time down at Wakefield. I, myself have a R33 GTR that has been tuned on Shell's V power racing. I had a look on shells website last night and noticed that the Goulburn servo doesnt sell it.

For those who's cars have been tuned on this fuel and have been to a track day how did you get around not having enough fuel for the day?

I dont want to have jerry cans in the car on the way down.

Link to comment
https://www.sau.com.au/forums/topic/184891-wakefield-park-and-fuel/
Share on other sites

Well if you're not taking jerry cans, then you're going to have to go back to goulburn to get fuel at some point. Get 98RON in Goulburn and dump some of the Pro Strength Nulon octane booster in it (i know for a fact you can get the pro strength from the BP at Marulan 25k's out of Goulburn, cos I bought it there last week :P)

Octane booster might not get it up to the level of VPRacing, but you've got no other choice unless you take some cans :unsure:

You're welcome.

Yeah it kinda sucks that you can only get 100ron at a select few places - I've warned a couple of mates off getting their cars tuned on it simply for that reason!

Good luck with your track day mate!

Bah.

This is rediculous!. In the whole of NSW Shell only sells racing at 8 servo's!

Im not too keen on running 98 with the "boosters" on a built motor.

Cheers for the quick reply

yes only 8 servos....which is why you shouldn't get your car tuned with these fuel unless you live close to these servos.

^^^

On the PFC the knock with 1.6 BAR (GT - RS's), 9.0:1 comp is about 15.

What the hell is wrong with Shell? I just sent them an email about having it only available at so few places within the state. Proberbly falling on deaf ears!!!!.

You've gotta remember that the cost of integrating the infrastructure for a completely new type of fuel would be fairly costly. They probably dont see the demand as high enough to roll it out australia wide until they can confirm that theres enough petrol heads out there to warrant it. Give it time.

Buy some jerry cans and run them. You're only going to get 98RON in Goulburn.

I find it funny / stupid that Shell won't supply 100RON so close to the track. The Shell out front of Eastern Creek doesn't stock V-Power Racing either....and being on a main transport hub (M7 / M4 intersection), and so close to the track, you'd think they would.

Just not ha-ha funny.

Edited by scathing

ET Racing fuel is now available from the Wakefield Park bowser.

http://www.wakefieldpark.com.au/

Give them a call to confirm 'which' ET racing fuel they are selling, but I think its 102 octane. From memory it was over $2L

I live right near a Shell that sells the racing and it's out of stock about 80% of the time anyway. Also since they use ethanol to up the octane and it has much lower taxes it should actually be cheaper than the 98 but it's not so they are ripping us off. Another thing to note is that the petrol stations buy vpower at 4 c/L more than 91 octane and yet they sell it for 10 c/L more.

Also, what everyone else said about them not selling it near places that would have high use. I just don't get what they're playing at.

All that said, my last couple of track days I filled two Jerry cans and took them with me. Did the job.

buy 2 20L jerry cans and fill up before you leave. depending on where you are travelling from you may need to buy 3 unless you don't mind chugging home on 98. You really have no option. I tend to go through about 100L on a trip from campbelltown to wakefield and back with 7-8 sessions on the track

There's a Shell near me that sells V-Power Racing, so I'll normally try and empty my tank by the night before a track day, and then fill up (and fill some jerry cans) before I head down.

I'll normally need about 2 tanks of fuel for a regular Wakefield track day (from home back to home), so usually I'll just fill up with 98RON at lunch time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...