Jump to content
SAU Community

Recommended Posts

Didnt know where else to Post this.

But It has come time for me to get mi Mits on some new tyres. Ive Been Looking around a bit, and have Noticed that Bugger all tyre shops actually have 20" tyres. BoB Jane were the only place out of about 5 that I Visted, that actually stock 20" tyres, only 1 brand tho, WANLI and $320 a tyre stings just a little. So I was hoping some 1 could steer me in the direction of some Magical place that have various brands of 20" tyres and good prices.

peace!

Link to comment
https://www.sau.com.au/forums/topic/185956-20-tyres/
Share on other sites

Your worried about $320 a tyre for 20's? onoes...

Dude a decent 20" tyre that isnt a death trap is going to be at the least, $400-450 a corner, and a lot more for a decent tyre :wave:

What distributors have you tried so far?

Link to comment
https://www.sau.com.au/forums/topic/185956-20-tyres/#findComment-3363450
Share on other sites

the Tyre Expets on Sydney rd Falkner will definetly have em. they also stock 2nd had ones too.

i picked up perelli pzeros. 275 on the rear. 19s. second hand but got great tread( still fine after 6 months) for like 200 or something.( think they were around 500 a tyre new).

http://www.thetyreexperts.com.au/

Link to comment
https://www.sau.com.au/forums/topic/185956-20-tyres/#findComment-3363459
Share on other sites

Your worried about $320 a tyre for 20's? onoes...

Dude a decent 20" tyre that isnt a death trap is going to be at the least, $400-450 a corner, and a lot more for a decent tyre :wave:

What distributors have you tried so far?

Ive tried a few, Mainly well known commercial places etc.

the Tyre Expets on Sydney rd Falkner will definetly have em. they also stock 2nd had ones too.

i picked up perelli pzeros. 275 on the rear. 19s. second hand but got great tread( still fine after 6 months) for like 200 or something.( think they were around 500 a tyre new).

http://www.thetyreexperts.com.au/

thanks for that one mate ill check em out!

Link to comment
https://www.sau.com.au/forums/topic/185956-20-tyres/#findComment-3363484
Share on other sites

if you want tyres pm me the size and ill hook you up with a quote i run the workshop at a tyre place in balwyn.hope that i can help.

can you do any deals on 315/35/17's? Sumitomos preferably.

Link to comment
https://www.sau.com.au/forums/topic/185956-20-tyres/#findComment-3365025
Share on other sites

i would spend the extra $$ and get a decent tyre.. Ive had a set of cheaper 20" tyres and they squell when cornering and have minimal grip and were outright dangerous in the wet.

I now have decent Nankang NS 2 performance tyres which costed me about $500 each, but their well worth it as they wear slower and have a heap of grip.

You can't put a price on your life.. trust me go the extra mile and buy something decent..you pay for what you get.

Link to comment
https://www.sau.com.au/forums/topic/185956-20-tyres/#findComment-3365332
Share on other sites

wtf?

lol thats massive for wat car?

widebody R32... rear wheel is Work VS-XX 17"x11" -6 offset. 315/35/17 is a common sized tyre in the US as its the same size corvettes and vipers use. They even make Nitto drags in that size :thumbsup:

Kakimoto wide body R33

I wish... kakimoto takes 355/something/17's. lol craig almost tore his hair out looking for new tyres... only people that make em are bridgestone and pirelli... special order.

Link to comment
https://www.sau.com.au/forums/topic/185956-20-tyres/#findComment-3365367
Share on other sites

I just bought 20inch rims for my R32 GTR i live in Sydney and got them from Tempe tyres, they were custom drilled on site and are perfect offset for the car.

They sold them with Nankang but i upgraded to a Toyo brand. It fills the guards perfectly and still have room to lower the car 2 inches from stock ride height when i get my coil overs soon. They cost usually $3600 but they had a deal going and i managed to bargain them to $2800 fitted with the up rated tyres to so i was very happy.

I cant believe it but my ride quality is still great even with the mrs in the car i was very surprised not that bumpy could be because i had a good set of tyreson there quality counts.

When i figure out how to put pics on this site i will put it in you guys will be surprised how good 20s look, i will keep the Original forged 16 inch GTR rims for track use and drifting events but the 20s are for show.

Cheers,

Dave.

Link to comment
https://www.sau.com.au/forums/topic/185956-20-tyres/#findComment-3365878
Share on other sites

Hi there Paul R33 i am not sure what it will cost for 20inch rubber yet i got them as i great package deal.But i will say this my GTR in its current mild form ran a 12.4 1/4mile with ease i had no wheel spin or broke traction, i have pushed this car hard on the street always and never had had probs unless i wanted them if you know what i mean and all of this was done with the cheapest set of standard Bob Jane tyres. Yep no bull so if below average tyres will rack up a low 12sec 1/4 and handle decently on the road im sure a set of low profile Toyos will easy out handle and grip the cheapest set of Bob Janes.

Cheers,

Dave.

Link to comment
https://www.sau.com.au/forums/topic/185956-20-tyres/#findComment-3366691
Share on other sites

have u had the wanli's before...??? iam not really a fan of them as the tend to understeer in the wet, wouldnt suggest them for a performance car.

Yea ive Got WANLI's atm, and they are dangerous in the wet. traction is a minimal. Drifting around every corner in the wet is bit rediculous at times. but id have to admit on Hot days they are Alright.

Link to comment
https://www.sau.com.au/forums/topic/185956-20-tyres/#findComment-3366723
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...