Jump to content
SAU Community

Recommended Posts

Got a 34 gt-t with about 90,000 kms. Got a microtech in and with the way it's tuned at the moment i'm getting good power from when the turbo spools up (4000rpm) to redline (7000rpm). However the gain in power between 6000 and 7000 is unreal. A friend (300zx owner) tells me it is common to increase the factory redline and after reading a couple of threads it appears this is the case. Which interests me as i'd like to extend this power range.

So basically I'm asking if i can increase the redline, and if so, what's a safe limit.

R34 gt-t

Stock rb25det neo

650cc injectors

600hp garret turbo

hybrid intercooler

bosch fuel pump

splitfire coils

greddy intake manifold

3 inch dump with 3.5 inch rest of exhaust

Basically everything without touching the internals. Currently running 308 rwkw on 18 psi boost. If you need more info let me know.

Any opinions are welcome.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/186244-increase-redline/
Share on other sites

After my car was tuned i noticed my rev limit was set to 7500rpm.

I dont hit the limiter often,it might happen when boost comes on in first and my foot is on the floor but i normally change before then anyway.

But to be on the safe side i might lower it to 7200rpm.

I rev mine to 7800 rpm, it starts to run out of puff by then anyway. I do however run a set of cams. Standard bottom end.

Maybe with that turbo you might try dropping in a set of sticks, make the power a bit earlier and not have to rev so hard.

308 rwkw might be leaning on the bottom end a bit, but R34s do run GTR rods, so maybe not as much as we think.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...