Jump to content
SAU Community

Recommended Posts

Ive been doing quite a few home services over the years for people looking for a cheaper yet professional alternative then taking it to a workshop. I'm a mechanic and gas fitter by day, have several Skylines of my own and like to help out others with them. Have recently done several Stagea 100K services also. I'm not operating a business nor am i interested in starting one lol, However i am offering to help out people who need some work done during the weekends. It will be cheaper then a workshop but i dont work for free lol.

PM me if your interested.

Link to comment
https://www.sau.com.au/forums/topic/186453-car-servicing-100k-services-etc-etc/
Share on other sites

Simon has been doing all the work on my car for the past 6 months. before that it was Boostworx..

Have had same great results with both mechanics..

Kinda tells you the quality of simons work hey :domokun:

+repz

Christian

Simon, what would I be looking at for fitting a clutch to R33 GTS25t including machining flywheel?

PM me to let me know

Cheers :whistling:

Lee

PS was that you in the cream 32 on port rush rd as posted in the spotted thread?

sure was mate, thats my gf's car.

Clutches are one of the few things i wont do at my place, well on 33's anyway, A hoist is needed pref. 32 boxes are no worries lol.

I can however point you in the right direction for well priced yet good clutch jobs.

Cheers

Simon

sure was mate, thats my gf's car.

Clutches are one of the few things i wont do at my place, well on 33's anyway, A hoist is needed pref. 32 boxes are no worries lol.

I can however point you in the right direction for well priced yet good clutch jobs.

Cheers

Simon

Speaking from personal experience there Simon haha!! :D

yes and no, ive done the exact cooler and fit to my neighbours S2 r33 and i found the cooling pro kit lacked a few brackets and clamps, which meant stuffing around a bit. But otherwise its around a 3 hour or so job. I like to take my time when it comes to trimming the bar since this its the most visual area.

chuck it in your sig mate, ive had very good results with me offering my services

yeah Dan does the right nut :D between the to you got a couple of half nuts

BTW who do you recommend for clutch jobs

Edited by Madaz

One of my mates also runs his own business from his house.

His name is Mark and his business is Fuel Automotive, he is a diesel Mechanic by trade and does all the work on my car.

He does all mechanical work no matter how big or small and is much cheaper than a workshop.

If you would like to use his services you can PM me and i will give you his number.

Please remember that he only does this stuff in his spare time as he has a full time job.

^Shaun, sounds like the same guy who works on Martin (HOSTILE) and PureSX's cars. if you can PM me a number for him, I'd be interested to get a quote from him.

Cheers

Hotwire you are correct as we are all close friends

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...