Jump to content
SAU Community

Recommended Posts

Monday 24th september, Nissan skyline R34 GTT stolen from rhodes shopping centre homebush at 12.03pm.

-security footage shows car leaving at 12.03pm following a silver honda accord sedan - with sunroof,stock looking-

through express boomgate exit.

-description of R34 rego- BBV.88H, white in colour with white spoiler on the rear, standard Gtt bodykit.

Neo RB25DET - Final Speed Bronze Wheels, Mechanically Standard .

small just jap sticker on rear window, dark tints.

If you have any information or saw/ see anything please PM or reply.

See pics attached.

post-42684-1190679239_thumb.jpg

post-42684-1190679256_thumb.jpg

post-42684-1190679272_thumb.jpg

post-42684-1190679299_thumb.jpg

post-42684-1190679315_thumb.jpg

post-42684-1190679339_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/186531-r34-gtt-stolen-monday-24907-rhodes/
Share on other sites

put your mobile number here..My friend's GTT white got stolen 2 years ago and had anonymous caller (must be the thief coz they read the forums) that the car was in fairfield market after being stripped of wheels and few other engine goodies. Good luck man..Did you have insurance??

alarm was due to go in wednesday, full shannons insurance - sis' car-

yeh gone in 20mins from the time she got there - arrive 11.39am- cameras show leaving 12.03pm

only had 65k kms - at least we hadnt fitted the turbo timer- or any other perfomance parts

Damn that sucks.... although security footage may help??? Seems to be more of these threads every day....

But also check your policy.... if the alarm wasn't already in, it might not be covered????? Not sure with Shannons though, but my Suncorp policy clearly states that if the car does not have a 3 point approved alarm then the insurance is void :)

no immobiliser - the alarm+immobiliser were due to be fitted 2 days from now --- M80.

its gone so soon we hadnt even transferred the rego.

I'm pretty sure having no alarm will void your insurance. Usually Shannons likes to have a 3point immobiliser in the car before they insure it.

yeh that had us thinking last nite, she had already stayed in the city with it - at a 5 star hotel for the weekend and it was parked by valet - couldve been keeping tabs on it for a few days but it was also parked on the street in bright le sands and was ok the next day.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...