Jump to content
SAU Community

Recommended Posts

  • Replies 369
  • Created
  • Last Reply

Top Posters In This Topic

.............why is everyone talking so SLOW after Targa? Ahhh.....a week later and all is well - everyone is talking about normal again.

Why do we love skylines?.....cause we can thrash the shit out of them, over and over and over and they still come back with " is that the best you can do?"

My little RB20 was smokey before the event - and after numerous tests we couldn't work out wether it was the turbo or engine.

What the hell - just run it and see what happens. After finishing 30th/ classic outright last year I was determined to get in the top 20 OR bust it.

EVERY gear change was on the rev limiter 7500 on every stage.

After day 3 the GCG hi-flow shit itself - on with a standard (the ceramic one) turbo for last 2 big days.

Day 4 ran at 1 bar....lost a few places - but still in top 20 - sorta happy but with 3 cars within a minute behind me things had to change.

Day 5 WTF screw open the bleed a few turns. All day including the longest stage of 47 klm/23 mins it was on 1.3 bar and lived fine.

The car went like a jet....got me and the ballast (105kg) to 15th. Pretty happy with that. And the ballast (Keith) was fantastic. :)

Well done MP SB KB.

NB The engine was only so so as well - it still blew shit loads of smoke after turbo change. Tuff little shiters those RB's

.............why is everyone talking so SLOW after Targa? Ahhh.....a week later and all is well - everyone is talking about normal again.

Why do we love skylines?.....cause we can thrash the shit out of them, over and over and over and they still come back with " is that the best you can do?"

My little RB20 was smokey before the event - and after numerous tests we couldn't work out wether it was the turbo or engine.

What the hell - just run it and see what happens. After finishing 30th/ classic outright last year I was determined to get in the top 20 OR bust it.

EVERY gear change was on the rev limiter 7500 on every stage.

After day 3 the GCG hi-flow shit itself - on with a standard (the ceramic one) turbo for last 2 big days.

Day 4 ran at 1 bar....lost a few places - but still in top 20 - sorta happy but with 3 cars within a minute behind me things had to change.

Day 5 WTF screw open the bleed a few turns. All day including the longest stage of 47 klm/23 mins it was on 1.3 bar and lived fine.

The car went like a jet....got me and the ballast (105kg) to 15th. Pretty happy with that. And the ballast (Keith) was fantastic. ;)

Well done MP SB KB.

NB The engine was only so so as well - it still blew shit loads of smoke after turbo change. Tuff little shiters those RB's

So..... was I right about the Turbo???? Or does it need to be somewhere in between?

"The dark side"

984

Great to hear everyone had such a good experience, this would be one of the very first years people aren't saying to me 'had a great time, BUT...'

There are always things to be fine tuned and improved, which we will do, but clearly we're on the right track to an even better event next year!

PS. Bring on the R35 fleet in '09!

PPS. Now I've finally got some time to get my own project back on track... still thinking I should have got another Skyline though!

Had to breifly tow the RX7 yesterday and we subbed the radiator support for a tow hook as most of the front end has been removed for the time being and its basically a shell with an engine... the tow strap actually cut right through the radiator support... didn't break the welds, but I now have a two pice support bar!

Not sure if its alloy or just really light tin/steel, but that along with heaps of factory alloy components and weigh saving measures like holes drilled into steel plating and use of plastic instead of sheet metal you can really see the two very different ways of making a Japanese performance car - Nissan stuffed the GTR with technology. instead Mazda just threw it out and made it light!

Wholly Guackamolli she does sound light!, And that my friend, is the essence of a good package ;)

I really noticed even the modest (50kg or so) weight saving in the white 34 in comparison to the blue 34.

Whilst the GTR is a great thing, you're always conscious of the weight and the punishment that puts the tyres through, not to mention when she starts to get away a little bit, she has lots of momentum :P Witness our huge moment on Cethana! LOL

I've gotta say I'm really looking forward to seeing your car all done, it's going to be a real nice thing ;)

So..... was I right about the Turbo???? Or does it need to be somewhere in between?

"The dark side"

984

You were right about the turbo - but motor still smokes a lot on start-up. Copmpression test (hot) pre targa was 165 for 5 clys and no.3 was 140. Will do another one soon but I reckon prob aftermarth of TT07 when chased a high end miss for 4 days and ended up being a F......fuel filter. The ETG showed running around 850c then compared to 730c now - reckon I nipped a piston/ring.

No worries I have a big buck ($600) engine swinging on hoist ready to go in. Bloody expensive RB's (ha).

Lucky1

Me again, I just wanted to take the chance and publicly thank and congratulate Tim (PHaT MR30) on a fantastic effort over the targa fortnight.

Tim took a huge blind leap by jumping in the silly seat with me, not knowing me well, and never having driven with me or experienced the car. That took alot of guts and is certainly not something that many people would do I'm sure.

Our 4 days of Recce in the Nuss was a ball, and you took in the information and changes to your calls I needed like some giant over-grown Sponge Bob Square pants!

Thanks for not screaming at me when i was struggling with the gear shift issues for the first couple of days, and thanks again for showing faith in me and not getting straight out of the car out after a couple of "double seat grab" moments. LOL

I think you've morphed into a top nav mate, and if we don't get a campaign together for next year, then I'm certain that if you put your feelers out you'll land a good gig in a good car :domokun:

This whole motorsport thing reminds me how fortunate we are to be able to compete in it, with the bonus of meeting some first-quality people along the way :(

So if anyone needs a good nav, with balls of steel, get it contact with Tim..........

..........

.............

..................

Or me

Cheers, Ben.

He was also very patent for all the time we spent buggering round getting our car on the trailer :D . But seriosly congrats Tim you did a great job. Apparently Dad's looking for a new nav for next year :banana:

Thanks guys means alot!

I should also publically thank Ben, I was actually quite worried to begin with getting in a car with someone I had never really met, I didn't know his background in motorsport other than a few Targas navigating.

4 days recceing soon confirmed it for me, this guy has some idea of whats going on.

I think after completing the event I can quite comfortably say I have never been in a car before with someone who once helmets are on, is so calm, he did all the right things, knew what to do when things go slightly wrong. And his driving? SMOOTH lines! It certainly makes you feel alot more comfortable to be sitting alongside someone who drives like this! Definately some of the best driving I have experienced!

I think given the right equipment and opportunities Ben would be a certain force to be reckoned with.

And a word of advice, stick to driving mate, your GOLD!

I was, but he's shit stiring and saying he'll drive the whole event and get a nav.

Bwaaaaahahaha..... but I though he was nav when you went off???

:bunny::):D see below ;

http://www.skylinesaustralia.com/forums/R3...56#entry3837356

Thanks guys means alot!

I should also publically thank Ben, I was actually quite worried to begin with getting in a car with someone I had never really met, I didn't know his background in motorsport other than a few Targas navigating.

4 days recceing soon confirmed it for me, this guy has some idea of whats going on.

I think after completing the event I can quite comfortably say I have never been in a car before with someone who once helmets are on, is so calm, he did all the right things, knew what to do when things go slightly wrong. And his driving? SMOOTH lines! It certainly makes you feel alot more comfortable to be sitting alongside someone who drives like this! Definately some of the best driving I have experienced!

I think given the right equipment and opportunities Ben would be a certain force to be reckoned with.

And a word of advice, stick to driving mate, your GOLD!

Awwww like big awww Shucks n stuff!!!

Thanks buddy!

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
×
×
  • Create New...