Jump to content
SAU Community

Recommended Posts

  • Replies 96
  • Created
  • Last Reply

Top Posters In This Topic

awww dang will apply for one later. but ill pop down for a looksy

Call them, you may be able to get one on the day. That's how i got my first one years ago, at a PIARC day.

You in for both days Matt???

Call them, you may be able to get one on the day. That's how i got my first one years ago, at a PIARC day.

You in for both days Matt???

ahh kool ill give em a cal. whats the cost like?

Actually, one other question...

Does anyone know where I might be able to get a couple of 25L tanks to bring fuel down? I don't want to have to do a day trip to get fuel!

pretty sure if you go to like a 4wd accessories shop that sell stuff for of roading they should have big jerry cans that big.

Thanks - I've been told that supercheap sell that sort of stuff :thumbsup:

pretty sure if you go to like a 4wd accessories shop that sell stuff for of roading they should have big jerry cans that big.

G'day Budge - Thanks for the offer - I'll see what supercheap have - but if there's nothing available, I'll take you up on that offer...

I'll PM you later if I don't have any luck.

Cheers,

matt

Mat, I have 2 you can borrow if you like.

Pick up and drop off in Rowville.

If anyone else needs Jerry cans i have two 20ltr cans myself and i will also be going to PI for the weekend.

Just call me on 0427 076490, if anyone wants to use them for the weekend.

NO SMS'ing as i can't reply on my work phone.

Cans have previously been filled with BP Ultimate; just in case it matters

Matt - I'm just there for Saturday... can't make it Sunday.

As for fuel cans you can get 20ltr cans anywhere, supercheap, bunnings etc.... But there is BP Ultimate in Cowes not far from the track. I take that 100ron optimax stuff with me so i use jerry cans.

Guest
This topic is now closed to further replies.



  • Latest Posts

    • If your head gasket lifted, you should have seen a coolant pressure spike. There's no need for a copper gasket/fire rings at 30psi. An MLS with perfectly clean/flat mating surfaces should suffice. 
    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
×
×
  • Create New...