Jump to content
SAU Community

Recommended Posts

But the best thing about this one is it has one of Duncans attessa controllers, so I can make it very rear biased and hopefully be able to handle it!

Um.... actually it won't. The lowest setting on those controllers is "standard" and all other settings are just increases in FWD bias.

Sorry but the only way you are going to make it more RWD biased is to take the front shaft out or avoid accelerating hard in a straight line. :banana:

Anyways.... Go Saints.

  • Replies 705
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

street class - street tyres (>100 UTQG)

race class - semi slicks

I think the international "rules" are >140 UTQG. I don't think a blanket tyre rule is the best answer but it's certainly a lot simpler than some of the other ideas going round. Simple is best.

I agree that Russ should be left to come up with some rules and put them up. Not everyone will agree with them, but if he is putting in the effort to organise such a huge event then I think he should get final say and be respected for it.

I'm sure Russ values the opinions posted here but it is his series and I'm pretty sure he has a set of rules in mind which will be made available as soon as they are finalised. People then have a choice, run within the rules or don't run.

Just to throw a cat amongst the pigeons and get you all talking somemore, Redline Time Attacks 2007 Rules: http://www.redlinetimeattack.com/docs/2007...tackRulesV2.pdf

I think those rules look pretty reasonable, except perhaps considering the intended japanese focus of this event would mean that the widebody/overfender rule for street class wouldnt be too appropriate, considering there would be a fair number of purely street driven cars with overfenders or widebody conversions.

EDIT: Just read the modified class rules where widebodys etc *are* allowed.

I guess this would now more depend on whether 3 classes are needed/desired...

Also, just my personal opinion, I dont see why headlinings should be removable in street class.

Carpets are a bit iffy, but I guess justifiable considering some people do drive without carpet in their street car...

But really, removing roof linings would be moving a little bit too far away from street cars I believe.

I also think the no pro drivers for street class rule is a good idea

Edited by swanny180

Lets not forget that this is intend to be a SAFE time attack event. The intention is build your best car, try to have fun on the track and achieve the best optimal time (SAFELY). It's looks like the main sticky point here is tyre selection. Is there any reason why we could not have 3 simple and fair classes of shonky street tyres, semi slick and slick?

Personally, I don't care about a $50 trophy. I care about the racing spirit, my safety and being able to drive the car to the track without getting ping for using slick on the street. I will never put street tyres on my GTR cause it's just so unsafe and I will get kick off the track for drifting as well :banana:

So can we agree to disagree on the tyre aspects. What's next? Trims/panels/chassis modification?

If you're talking about the 'racing spirit' and it's being called a "time attack" event, then shouldn't there at least be some effort to align with the original Rev Speed event rules? I think the rule of no slicks, any tyre up to semi slicks is my suggestion. Most competitors will not run street rubber if they want good times, so having a street tyre class, and a semi slick class is a silly thing. Just make it any tyre people want to run, but they must have tread pattern. Done. Remember, it's about keeping it simple.

Just to throw a cat amongst the pigeons and get you all talking somemore, Redline Time Attacks 2007 Rules: http://www.redlinetimeattack.com/docs/2007...tackRulesV2.pdf

There is some dumbarse stuff in there;

- Sequential Gear Boxes Not Permitted in Street Class.

- Sequential Gear Boxes Not Permitted in Modified Class.

But sir, my car (35GTR, M3, M5, VW, Audi etc etc) comes standard with a sequential gearbox :)

- All Street Class vehicles must use DOT street tires with a UTQG tread wear rating of 140 or higher, Tires with UTQG tread wear rating under 140 are not permitted in Street Class

But sir, my car (35GTR, M3, M5, VW, Audi etc etc) comes standard with a tyre rated less than 140 :)

- All Modified Class vehicles are required to use DOT approved tires with UTQG tread wear ratings of 50 and above. Tires with less than a UTQG rating of 50 are not permitted in Modified Class.

No problem, Hoosier make a tyre that has a rating of 50 printed on it, but it's really a 30 :no:

- Front under tray cannot go rearward past the center-line of the front axle

But sir, my car comes standard with a front undertray that goes rearward past the centre line of the front axle :no:

And lastly;

- All vehicles must use tires that are legal for use on public roadways in the United States, Japan or the European Union.

What about us Ozzies? ;)

Merry Xmas

Gary

Lets not forget that this is intend to be a SAFE time attack event. The intention is build your best car, try to have fun on the track and achieve the best optimal time (SAFELY). It's looks like the main sticky point here is tyre selection. Is there any reason why we could not have 3 simple and fair classes of shonky street tyres, semi slick and slick?

Personally, I don't care about a $50 trophy. I care about the racing spirit, my safety and being able to drive the car to the track without getting ping for using slick on the street. I will never put street tyres on my GTR cause it's just so unsafe and I will get kick off the track for drifting as well ;)

So can we agree to disagree on the tyre aspects. What's next? Trims/panels/chassis modification?

only reason is that time attacks have street tyre and semi slick classes, and no full slicks. is there any reason it should be done different here?

there's nothing unsafe about using road tyres on a race track. but if you think you have too much power for them, then stay on your semi slicks and run in that class. no problem.

the point is its a much easier way to seperate the classes than trying to make your own rules based on levels of modifications. your case is a perfect example - a heavily modified car won't want to run on street tyres and therefore will be in the race/semi slick class. perfect. doesn't mean the street tyre class shouldn't be there for less modified cars. And if a heavily modified car were to run on street tyres, they'd probably struggle to beat much less modified cars that aren't overpowering their tyres, so they act as a bit of a 'leveller'.

if the classes are going to be based on mods, then using an established set of rules makes alot more sense than trying to come up with your own. either Duncan's (I think it was) suggestion of using Production and Improved Prod rules or the Rev Speed rules.

If you're talking about the 'racing spirit' and it's being called a "time attack" event, then shouldn't there at least be some effort to align with the original Rev Speed event rules? ...having a street tyre class, and a semi slick class is a silly thing.

isn't that how the original time attack rules are - street tyres and semi slicks?

isn't that how the original time attack rules are - street tyres and semi slicks?

Not sure how they group the classes/results, but I was referring to the rules not permitting full slicks. I still think the street tyres are a waste of time hehe ;)

Gary has some good points tho, whatever rules Russ comes up with should be relevant for Australia, and not include over-complicated restrictions..

Merry Xmas all!!

There is some dumbarse stuff in there;

- Sequential Gear Boxes Not Permitted in Street Class.

- Sequential Gear Boxes Not Permitted in Modified Class.

But sir, my car (35GTR, M3, M5, VW, Audi etc etc) comes standard with a sequential gearbox :laugh:

- All Street Class vehicles must use DOT street tires with a UTQG tread wear rating of 140 or higher, Tires with UTQG tread wear rating under 140 are not permitted in Street Class

But sir, my car (35GTR, M3, M5, VW, Audi etc etc) comes standard with a tyre rated less than 140 :nyaanyaa:

- All Modified Class vehicles are required to use DOT approved tires with UTQG tread wear ratings of 50 and above. Tires with less than a UTQG rating of 50 are not permitted in Modified Class.

No problem, Hoosier make a tyre that has a rating of 50 printed on it, but it's really a 30 :nyaanyaa:

- Front under tray cannot go rearward past the center-line of the front axle

But sir, my car comes standard with a front undertray that goes rearward past the centre line of the front axle :nyaanyaa:

And lastly;

- All vehicles must use tires that are legal for use on public roadways in the United States, Japan or the European Union.

What about us Ozzies? :)

Merry Xmas

Gary

that is pretty retarded. is this a cams rule list? of the top of my head 048 advans come with 60 treadware lol.

there's nothing unsafe about using road tyres on a race track. but if you think you have too much power for them, then stay on your semi slicks and run in that class. no problem.

I've tracked less powerful cars, my stock s2000 and C32AMG, with street tyres before. After a couple of laps the tyres got too soft and it's not much fun. The stability control on the Merc prevent the car from loosing control but the s2k is more than a handful to control. The attessa system on the GTR is a beauty. With twice the power output of the c32, it doesn't have significant stability problem with street tyres until the tyres get too hot. So, it really depends on the format of the time attack. If it's a 20 mins session, then I would hate to see accidents on the track because people run around on overheated street tyres just because they want to qualify for this class. Also by allowing people to run only street tyres, you are not bridging the gaps between modern cars with stability control and cars without any electronic stability control system

the point is its a much easier way to seperate the classes than trying to make your own rules based on levels of modifications. your case is a perfect example - a heavily modified car won't want to run on street tyres and therefore will be in the race/semi slick class. perfect. doesn't mean the street tyre class shouldn't be there for less modified cars. And if a heavily modified car were to run on street tyres, they'd probably struggle to beat much less modified cars that aren't overpowering their tyres, so they act as a bit of a 'leveller'.

The questions are do we want any leveller in a time attack event where we should be trying to get the best time we can achieve and what is stopping someone from winding down the boost and use street tyres?

What ever the classes will be, I will be keen to attend all of them if possible. I just hope that the rules will be simple without too many restriction. I will use all tyres; street, semi and slick; to see what is the best time I can achieve....just for the fun of it. As mentioned before, the winners will still be $100+g gtr and the extreme European exotica. Neither of which will be mine :(

Edited by 9krpm
hey duncan

what compound are the ao48's??

There are 3 "compounds" of A048, so called "soft", "medium" and "medium/hard", not all compounds are available in all sizes and to further complicate matters, Yokohama Australia (in their infinite wisdom) don't bring in all the available compounds and sizes. Consequently it woiuld be my understanding that Duncan has to race on "medium/hard". This season we changed one of the race team cars (not a Skyline) from 17" wheels to 16" so we could run the "mediums", result being 0.75 secs faster at OP. With no discernable difference in tyre life.

So if you are contemplating running A048's I strongly suggest that you check the sizes and compounds first, before you buy wheels (too late he said).

Happy New Year

Gary

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • OK, so regardless of whether you did Step 1 - Spill Step 2 - Trans pan removal Step 3 - TCM removal we are on to the clean and refill. First, have a good look at the oil pan. While you might see dirty oil and some carbony build up (I did), what you don't want to see is any metal particles on the magnets, or sparkles in the oil (thankfully not). Give it all a good clean, particularly the magnets, and put the new gasket on if you have one (or, just cross your fingers)
    • One other thing to mention from my car before we reassemble and refill. Per that earlier diagram,   There should be 2x B length (40mm) and 6x C length (54mm). So I had incorrectly removed one extra bolt, which I assume was 40mm, but even so I have 4x B and 5x C.  Either, the factory made an assembly error (very unlikely), or someone had been in there before me. I vote for the latter because the TCM part number doesn't match my build date, I suspect the TCM was changed under warranty. This indeed led to much unbolting, rebolting, checking, measuring and swearing under the car.... In the end I left out 1x B bolt and put in a 54mm M6 bolt I already had to make sure it was all correct
    • A couple of notes about the TCM. Firstly, it is integrated into the valve body. If you need to replace the TCM for any reason you are following the procedure above The seppos say these fail all the time. I haven't seen or heard of one on here or locally, but that doesn't mean it can't happen. Finally, Ecutek are now offering tuning for the 7 speed TCM. It is basically like ECU tuning in that you have to buy a license for the computer, and then known parameters can be reset. This is all very new and at the moment they are focussing on more aggressive gear holding in sports or sports+ mode, 2 gear launches for drag racing etc. It doesn't seem to affect shift speed like you can on some transmissions. Importantly for me, by having controllable shift points you can now raise the shift point as well as the ECU rev limit, together allowing it to rev a little higher when that is useful. In manual mode, my car shifts up automatically regardless of what I do which is good (because I don't have to worry about it) but bad (because I can't choose to rev a little higher when convenient).  TCMs can only be tuned from late 2016 onwards, and mine is apparently not one of those although the car build date was August 2016 (presumably a batch of ADM cars were done together, so this will probably be the situation for most ADM cars). No idea about JDM cars, and I'm looking into importing a later model valve body I can swap in. This is the top of my TCM A couple of numbers but no part number. Amayama can't find my specific car but it does say the following for Asia-RHD (interestingly, all out of stock....): So it looks like programable TCM are probably post September 2018 for "Asia RHD". When I read my part number out from Ecutek it was 31705-75X6D which did not match Amayama for my build date (Aug-2016)
    • OK, Step 3, if you need to remove the valve body, either to replace it, the TCM, or to do a more complete drain.  First, you need to disconnect the TCM input wires, they are about half way up the transmission on the drivers side. One plug and the wires are out of the way, but there is also a spring clip that stops the socket from sliding back into the transmission. On my car the spring clip was easy to get, but the socket was really stuck in the o-ring of the transmission housing and took some.....persuasion. You can see both the plug to remove (first) and the spring clip (second) in this pic Incidentally, right next to the plug, you can see where the casting has allowance for a dispstick/filler which Nissan decided not to provide. there is a cap held on with a 6mm head bolt that you can remove to overfill it (AMS recommend a 1.5l overfill). Final step before the big mess, remove the speed sensor that is clipped to the valve body at the rear of the box.  Then removal of the Valve Body. For this the USDM Q50 workshop manual has a critical diagram: There are a billion bolts visible. Almost all of them do not need to be removed, just the 14 shown on the diagram. Even so, I both removed one extra, and didn't check which length bolt came from which location (more on that later....). Again it is worth undoing the 4 corners first, but leaving them a couple of turns in to hold the unit up....gravity is not your friend here and trans oil will be going everywhere. Once the corners are loose but still in remove all the other 10 bolts, then hold the valve body up with 1 hand while removing the final 4. Then, everything just comes free easily, or like in my case you start swearing because that plug is stuck in the casing. Done, the valve body and TCM are out
    • OK, so if you are either going for the bigger fluid change or are changing the valve body which includes the Transmission Control Module (TCM), first you should have both a new gasket 31397-1XJ0A and a torque wrench that can work down to 8Nm (very low, probably a 1/4 drive one). You can probably get by without either, but I really didn't want to pull it all apart together due to a leak. First, you now need that big oil pan. The transmission pan is 450 long x 350 wide, and it will probably leak on all sides, so get ready for a mess. There are 24x 6mm headed bolts holding the pan on. I undid the 2 rear corners, then screwed those bolts back in a couple of turns to let the pan go low at that end, then removed all the middle bolts on each side. Then, undo the front corner bolts slowly while holding the pan up, and 80% of the fluid will head out the rear. From there, remove the remaining bolts and the pan is off. You can see it is still dripping oil absolutely everywhere...it dripped all night.... I got another couple of litres when I removed the pan, and then another few when I removed the valve body - all up another 4l on top of the 3 already dropped in step 1.
×
×
  • Create New...